User manual D-LINK DWL-AG132 INSTALLATION GUIDE

[. . . ] Turn on the computer and insert the D-Link AirPremier AG® DWL-AG132 Driver CD in the CD-ROM drive. The installation Wizard will automatically appear. Click Install Drivers If the Installation Wizard does not automatically start on your computer, type "D:\Drivers\setup. exe. " If the Wizard does start, proceed to the next screen. Click Next Click Next 3 D-Link Systems, Inc. Installing Setup Wizard Using the the Drivers DWL-AG132 Install Guide DWL-AG700AP Installing the Drivers (continued) Click Next Click `Yes, I want to restart my computer now. ' Click Finish You have completed the installation of the drivers! D-Link Systems, Inc. 4 Connecting the DWL-AG132 DWL-AG132 Install Guide Connecting the DWL-AG132 Link/Power LED Link - indicates that the DWL-AG132 is properly installed. [. . . ] By default, the channel is set to 6 and selection is automatically determined by the DWL-AG132. Signal Strength: Represents the wireless signal between the access point and the DWL-AG132. The percentage coincides with the graphical bar. Packet Count: Graphically displays the statistics of data transmitted and received. 11 D-Link Systems, Inc. DWL-AG132 Install Guide Appendix B Using the AirPremier AG Utility Configuration SSID: The Service Set Identifier is the name assigned to the wireless network. The factory SSID setting is set to default. Make changes here to match the SSID on existing wireless router or access point. Wireless Mode: The factory setting is set to Infrastructure. Ad-Hoc mode is used for peer-to-peer networking. Data Encryption: The default setting is set to Disabled. The adapter supports WEP ad WPA, when encryption is enabled. Authentication: Allows you to specify the authentication mode for the network. The default setting is set to Open Authentication. D-Link Systems, Inc. 12 Appendix B Install Guide DWL-AG132 DWL-AG132 Install Guide Appendix B Using the AirPremier AG Utility Configuration (continued) Key Length: When encryption is enabled, you will have the option to specify the level and key format of the encryption used. Select the appropriate Key Index: 1-4, and enter ASCII or hexadecimal digits in the appropriate field. IEEE 802. 1x: When encryption is enabled, you will have the option to specify if you wish to use 802. 1x authentication. 13 D-Link Systems, Inc. DWL-AG132 Install Guide Appendix C IP Address Configuration To connect to a network, make sure the proper network settings are configured for the DWL-AG132. For MICROSOFT WINDOWS XP: Go to Start > right-click on My Network Places > select Properties > double-click on the network connection associated with the DWL-AG132. Click Internet Protocol (TCP/IP) Click Properties Dynamic IP address setup Used when a DHCP server is available on the local network. [. . . ] and Canadian customers can contact D-Link Technical Support through our website or by phone. Technical Support United States Telephone (877) 453-5465 Twenty four hours a day, seven days a week. World Wide Web http://support. dlink. com E-mail support@dlink. com Canada Telephone (800) 361-5265 Monday through Friday, 7:30am to 12:00am EST. World Wide Web http://support. dlink. ca E-mail support@dlink. ca Version 1. 0 Revised 02/11/05 ©2005 D-Link Systems, Inc. [. . . ]