User manual DA-LITE IMAGER

[. . . ] Measure the width of the viewing area of your screen and refer to the appropriate method of installation below. The hanger bracket figure shows the type and quantity of bracket that is supplied based on the size of the screen. Method 1: Screens 80" and smaller in viewing width. [. . . ] The top of the frame will be 1/8" above the top of the wall bracket when mounted. You will need at least 5/8" clearance above the bracket to hang the screen. Figures 2, 3, and 4 show the proper orientation for the supplied wall brackets. To install the small wall bracket, you must measure the overall height of the screen frame and subtract 1-3/8". Using that dimension, measure down from the top edge of the wall bracket and mark the wall for two screw holes. The holes should be centered within the frame and 6" apart. Attach the small wall bracket to the wall. Refer to Figure 4 for proper orientation. The bracket should slide up and down easily. Hang the screen on the brackets by hooking the bottom of the frame onto the small wall bracket and lift up until you can hook the top of the frame on the top large bracket. Push down on the frame to seat it on the brackets. Refer to Figure 4. LARGE WALL BRACKET 1-PIECE FIGURE 2 2 SMALL WALL BRACKET 1-PIECE METHOD 1 (SCREENS 80" AND SMALLER IN VIEWING WIDTH) LARGE WALL BRACKET METHOD 2 (SCREENS OVER 80" UP TO 96" IN VIEWING WIDTH) Method 2 1. Secure the large wall bracket to wall studs at the desired height. The top of the frame will be 1/8" above the top of the large wall bracket when mounted. You will need at least 5/8" clearance above the bracket to hang the screen. Figures 5 and 6 show the proper orientation for the supplied wall brackets. OVERALL HEIGHT OVERALL HEIGHT - 1-3/8" 6" FIGURE 3 3 LARGE WALL BRACKET 2-PIECES 2 LIFT WALL FIGURE 5 1 1 FIGURE 4 WALL OVERALL HEIGHT OVERALL HEIGHT -1/4" 2 FIGURE 6 2. [. . . ] To clean a stubborn stain or a sticky surface, use denatured alcohol (methanol or methyl alcohol) following the same procedure as for water. LARGE WALL BRACKETS 3-PIECES FIGURE 7 2. To install the lower large wall bracket, you must measure the overall height of the screen frame and subtract 1/4". This is the dimension from the top of the upper large wall bracket to the bottom of the lower large wall bracket. [. . . ]