User manual DA-LITE MM8C-42FS

[. . . ] Always push from the side of the cart, never from the front or back of the cart. Required Tools: 7/16" wrench 1/2" socket 9/16" socket Phillips screwdriver Ratchet and extensions - - Procedure 1. Remove contents from carton and examine for damaged or missing parts. The keys for the cabinet doors are tied to the outside of the cart. 2. [. . . ] Mount the Rack Rail to the Brackets located on the bottom and middle shelf. Make certain the Rack Rails are touching the bottom shelf. Tighten all fasteners. Figure 3 5. You will need access to the top of the middle shelf. Remove one of the sliding Laptop Shelves by pulling the shelf out. Press each black plastic tab towards the Laptop Shelf and pull Shelf out. Be aware there may be grease on the slides. Optionally, install the Cable Management Angle. Install one Rack Rail Mount Bracket on top of bottom shelf and one on underside of middle shelf. Angle may be located on either side of cabinet. Position the Angle with the curved corner nearest the Rack Rails and secure to Brackets. Use this Angle by cable tying electrical cords to it. Figure 5 7. Install Aluminum Columns onto top shelf. Position the Columns with slots facing toward each other. Leave fasteners loose. Figure 6 8. Install Mount Support Bracket onto Aluminum Columns. [. . . ] It may be located in several optional locations. Insert the 2-1/2" Grommet into the hole the electrical cord will pass through. It may pass through the bottom shelf. Figure 13 14. [. . . ]