User manual DAEWOO 14H1N

[. . . ] E INSTRUCTION MANUAL 14H1N, 20H1N 14H1T, 20H1T 14H2N, 20H2N 14H2T, 20H2T WORTH knowing Please keep the video machine's guarantee card receipt safe for warranty purposes. Precautions x Read carefully through this manual to familiarise yourself with this high quality televideo. x Make sure the rating of your household electricity supply matches that shown on the back of the televideo. x Refer to this chapter and the "Initial installation" chapter to help you install and adjust your televideo. Do not. . . x expose the televideo to high levels of humidity and heat, to avoid the risk of E fire and electric shock. x open the televideo. [. . . ] Using the VW button, select the desired letter or number or blank . Manual tuning Locate the cursor to Manual tuning with VW buttons at the Install menu and then press CB buttons. During manual tuning "Please wait !" On Screen Display will be displayed. Keep tuning until the channel received machines the programme number. Fine tuning If you are unable to get a good picture or sound because of poor reception, it is possible to adjust the fine tuning, Select the Fine tuning at the Install menu press CB buttons to get a good picture and sound. Please wait! Manual tuning C01 > P01 Fine tuning 06 7 PLAYING cassettes x Your televideo is switched on by the main power switch on front panel and by the button. Playing back Load the cassette by pushing it smoothly and squarely into the cassette bay, with its windows pointing up. B PLAY SP 0:12:34 Start playback (Remote controller or panel button) Pr 01 ARTE Clock 12:34 L STOP 0:12:34 Stop playback (Remote controller or panel button) EJECT 0:12:34 Pr 01 ARTE Clock 12:34 Eject the cassette (Panel button) F FF 0:12:34 Pr 01 ARTE Clock 12:34 Fast forward or rewind the cassette from stop (Remote controller or panel button) G REW 0:12:34 Pr 01 ARTE Clock 12:34 x A smaller picture may be seen while switching from the Search mode to the PB mode. This is not a sign of malfunction. x When you load a protected cassette (e. g. pre-recorded film) playback starts automatically. x During still, or search, you don't hear the sound. x If the still picture is jittering, you can steady it by using the VOL/V-LOCK button. But this 2Heads combo can not guarantee still picture quality. x You can reduce horizontal interference stripes resulting from in accurate tracking (when playing tapes of poor quality or recorded on ther machines) by using the PR/TRK buttons during playback or try auto trackin using 0/ATK button. 5 minutes in still, the cassette plays back automatically. 8 P x Your televideo is switched on by the main power switch on the front panel and by the button. l a y i n g CASSETTES Still picture from playback. Each press of the button advances the picture one frame. Play (B) button switches back to normal playback. Although you can see the picture, we can not guarantee still picture quality. Because of Still picture quality is very poor on 2-Heads mechines. Still STILL 0:12:34 E Variable picture search F CUE SP 0:12:34 Start from playback you can control search speed in 2 steps either forwards (F) or backwards (G). Play ( B) button switches back to normal playback. G REV SP 0:12:34 Auto repeat Miscellaneous Wake up Child lock Auto repeat Tape speed Decoder VW CB MENU : Select : Change : Return Move the cursor down to the "Auto repeat" line. Change to "Yes" by cursorCB. No SP No Auto repeat works with or without safety tab. Playback > End oif cassette > Rewind > Playback B PLAY SP 0:12:34 Note : This televideo has the function of NTSC playback (SP tape only) Don't use NTSC SLP tape. x If you have made a mistake, move to the position you want to change using the VW CB button and change the setting. x The recorder will eject cassettes which have the safety tab removed. Timer review - erasing or changing Call the televideo's "Main menu", choose "Timer programming". Select the programming to erase or change If you want to erase this programming press button CLEAR. If you wish to make changes : Move to the position you want to change using the VW CB buttons. Change the setting using the VW buttons. Auto tracking If you press the 0/ATK key in Playback mode, the televideo will operate the auto tracking function again. x If you wish to record from a satellite receiver select under "Pr" the satellite programme location or AV (depending on the connection with the antenna cable or a SCART cable. ) NB : Leave the satellite tuner switched on and to the programme you want to record. 11 M O R E functions INDEX +/F FF 0:12:34 INDEX 02 x Your televideo automatically sets electronic maker (index) at the beginning of each recording and timer recordings. It is these markers which the index function detects. Pr 01 ARTE Clock 12:34 Press the button depending on the number of recordings (index marks) that you wish to wind forward. [. . . ] Set the other video machine to playback and your Televideo machine to record. Picture and sound of the selected station is always available on the EURO AV socket, e. g. On the other video, select its AV input and set the machine to record. Switch your televideo to playback at the position you want copying to start. 15 Connections and ASSEMBLING Scart socket This is used to connect : a VCR a CAMCODER and a video game console or satellite TV receiver or DVD. [. . . ]