User manual DAEWOO DLM-42C7 annexe 1

[. . . ] LCD TELEVISION INSTRUCTION MANUAL DLM-26C3(B/BD/P/PB/PBD/R) DLM-32C1(B/BD/P/PB/PBD/R) DLM-32C3(B/BD/P/PB/PBD/R) DLM-32C5(B/BD/P/PB/PBD/R) DLM-32C7(B/BD/P/PB/PBD/R) DLM-32U1(B/BD/P/PB/PBD/R) DLM-32U2(B/BD/P/PB/PBD/R) DLM-37C7(B/BD/P/PB/PBD/R) DLM-42C1(B/BD/P/PB/PBD/R) DLM-42C5(B/BD/P/PB/PBD/R) DLM-42C7(B/BD/P/PB/PBD/R) Caution CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and servicing instructions in the literature accompanying the appliance. WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION : TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. 2 Important Safeguards Please read the following safeguards for your TV and retain for future reference. Always follow all warnings and instructions marked on the television. 1. [. . . ] Please wait until the Edit menu appears. · If you don't want to edit the programs now, escape from the menu with the "MENU" or "EDIT" button. Picture Screen Sound Install Function Edit Prog. 00 Name ------------------------Channel C 22 C 21 C 21 C 21 C 21 C 21 MENU Skip Yes No No No No No MENU 01 02 03 04 05 M Move Delete Move Exit Skip 27 Setting Up TV Stations Manual tuning 1. Press the Number buttons(0~9) or the " PR " button to select a program number you want. OK LECT PR PR S. EFFECT 2. Locate the selection bar on the Manual tuning at the Install menu. · Press the "MENU" button to select the Install menu. · Move the selection bar to the Install menu with " " buttons. · Place the selection bar on Manual Tuning and press the " " button. Picture Screen Auto Tuning Manual Tuning Setup Access Access Access Access MENU Sound Install Function Edit M Move Select MENU Exit 3. · A tuning screen will appear and cursor will move from left to right / from right to left. If you want to stop tuning press the "MENU" button. · You should press the "OK" button to store program then the PR number is changed to red. If you don't want to store the program, press " " button to skip program. · To store another program, select other PR number using " " buttons and press " " buttons. Manual Tuning OK SELECT Pr 01 Euro Access MENU Exit Note : · If you are unable to get any programs using Auto Tuning because of a poor broadcasting signal, it is possible to store the Manual tuning. 28 Setting Up TV Stations Setup The Setup menu shows you information as follows: - Channel, System, Frequency, Station name, Program number and Store to PR number. 1. Searching for channels in the Setup menu · Press the " PR " buttons to select a program number you want. · Move to SETUP in the Install menu. · Search a real channel informations(Channel, System and Program) with " / " buttons. · If you save the selected channel to favourite program number, move the cursor to Store To and select using the " ", "OK" buttons. Fine tuning · Move to SETUP in the Install menu. · Move the cursor to Frequency by pressing " / " buttons. · Adjust the fine tuning with the " " buttons. Note : · If you are unable to get a good picture or sound because of a poor broadcasting signal, adjustment of the fine tuning might improve it. VOL PR Picture Screen Sound Install Function Auto Tuning Manual Tuning Setup Edit Access Access Access Access OK SELECT PR Move Select MENU Exit PR Picture Screen Sound Channel System Frequency Name Program C 22 Euro 479. 31 MHz ----00 00 OK SELECT VOL PR Install Function Store To Move Access 0~9 Adjust MENU Exit 3. Enter a station name · Move to SETUP in the Install menu. [. . . ] If you want to look at a subpage for a longer period of time, press the "HOLD" button ( ). The HOLD symbol appears and the contents of the subpage shown are kept on the screen and no longer updated or switched to other subpages. Pressing the "HOLD" button again, the current subpage appears. CALLING UP SUBPAGE DIRECTLY Pressing the "S-CODE" button ( ) , " - - - - " appears. [. . . ]