User manual DAEWOO DLX-42C7

[. . . ] LCD TELEVISION INSTRUCTION MANUAL DLX-32C7 DLX-37C7 DLX-42C7 Proper use guarantees product life. Before using the product, be advised that you read this owner's manual well and try to operate it. Caution CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and servicing instructions in the literature accompanying the appliance. WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE AND OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHOULD NOT BE PLACED ON THIS APPARATUS. CAUTION : TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. 2 Important Safeguards Please read the following safeguards for your TV and retain for future reference. Always follow all warnings and instructions marked on the television. 1. [. . . ] · Place the selection bar on Auto Search and press the " " button. Move Edit Channel Fine Tune Change MENU Return 4. Select the "OK" selection bar pressing by " " button. Auto Search Antenna Edit Channel Fine Tune This will automatically search the channels, do you wat to preoceed? 2 Cancel OK Move OK Analog MENU Exit Move Change MENU Return 5. Wait until the Channel menu appears. Auto Search Antenna Edit Channel Fine Tune 2 Channel Found : 0 Auto Search in Progress. . 27 % OK Analog MENU Exit Move Change MENU Return 24 Setting Up TV Stations Fine tune 1. Searching for channel finely · Select a Channel number you want to tune finely with the " CH " buttons. · Press the "MENU" button and move to the Channel menu. · Move the selection bar to the Fine tune with " " buttons. · Press the "CB" buttons to adjust the fine tuning. Antenna Edit Channel Fine Tune Move Select MENU Return Note: · If you are unable to get a good picture or Sound because of a poor broadcasting signal, adjustment of Frequency might improve it. Edit Channel 1. Adding the Channel · Select a Channel number you want to add with the "NUMBER" buttons. Select Channel by pressing " ". Then select "ADD/DEL" by pressing "CB". Edit Channel Add 1 5 13 15 40 45 Del Channel Select FAV. CH Favorite Channel Add/Del Add MENU Return Del 2. Deleting the Channel · Press MENU Button. Select Channel by pressing " ". Then select "ADD/DEL" by pressing "CB". Channel Select FAV. CH Favorite Channel Add/Del Add Edit Channel Add 1 5 13 15 40 45 Del Del MENU Return 25 Setting Up TV Stations FAV CH - You can set channel you watch frequently as favorites. Select Channel by pressing " " button. · Select Edit Channel selection bar by pressing " " button. · Press "FAV CH" button, on the Edit Channel mode. then you can see " ". Channel Select FAV. CH Favorite Channel Add/Del Add MENU Return Edit Channel Add 1 5 13 15 40 45 Del Del 2. Select Channel by pressing " " button. · Select Edit Channel selection bar by pressing " " button. · Press "FAV CH" button again, on the Edit Channel mode. then " " disappeared. Channel Select FAV. CH Favorite Channel Add/Del Add Edit Channel Add 1 5 13 15 40 45 Del Del MENU Return 3. Viewing the Favorite CH · Whenever pressing "FAV CH" button, the Channel changes as the selected Channel order. MENU FAVORITE CHANNEL EXIT 5 15 40 GUIDE FAV CH MEDIA MTS P. MODE PIP INPUT STILL SWAP POSITION FAV. CH Change Select OK Move 26 Selection of TV/VIDEO Input Signal When watching video, Camcorder, DVD, Cable TV with External Input - When you presses INPUT Button, You can select as follows by pressing " AIR/CABLE AV Component HDMI1 HDMI2 PC " and "OK" buttons. OPTION INPUT VOL CH OK MENU EXIT Analog Air INPUT 26 AV 27 Selection of Multimedia Input Signal When connecting PC, STB, DVD with Multimedia 1. [. . . ] Off Time Set · Move to Off Time Set in Off Timer of the Time menu. · To go to the Off Time Set, press the " " buttons. · Place the cursor to AM / PM / Hour / Min. with the " " buttons and then presses the "OK" button to complete. Off Timer Off Time Set On Move Change MENU Return Off Timer Off Time Set On Move Change MENU Return Adjustment of Sleep timer 1. [. . . ]