User manual DAEWOO DRV-4705B

[. . . ] DW-R77D1D-JB-I(GB) 2008. 4. 11 2:13 PM `A mac001 1200DPI 90LPI DVD Recorder DR-4705B Instruction Manual DW-R77D1D-JB-I(GB) 2008. 4. 11 1:53 PM `i mac001 1200DPI 90LPI Safety Instructions INTRODUCTION Please keep the DVD Recorder's guarantee sheet and receipt in a safe place. Precautions · Read this booklet carefully. · Make sure the rating of your household electricity supply matches that shown on the back of your DVD Recorder. · Read this page and chapter `Setting up your DVD Recorder' to help you set up and adjust your product correctly. · Do not put the DVD Recorder in a hot or humid place. [. . . ] Follow the same procedure as `Digital Output` to set the Dynamic Range. Preference > Audio Digital Output ENTER SETUP Confirm Exit 24 Digital Output 1 Use [. . . ] to select `Digital Output` while the Audio submenu is Preference > Audio Bitstream PCM MENU Back Full Middle Off MENU Back DW-R77D1D-JB-I(GB) 2008. 4. 11 1:53 PM ` 25 mac001 1200DPI 90LPI Setup `Preference' / Parental Controls Set Parental Level The Parental Controls feature allows you to prevent DVDs from being played based on their ratings or to have certain discs played with alternative scenes. Kid safe'. While `Preference Control`. ` is selected, press [. . . ] to select `Parental Parental Control MENU Change Password Auto Setting ENTER SETUP Confirm Exit 4 5 Then press [] to change parental level. Use [. . . ] to select the desired parental level and press [ENTER] to confirm. Preference Video Audio Parental Control Change Password Auto Setting `Adult' to `Kid safe' : Some discs contain scenes not suitable for children. If you set a rating for the DVD Recorder, all scenes with the same rating or lower will be played. Higher rated scenes will not be played unless an alternative scene is available on the disc. The alternative must have the same rating or a lower one. If no suitable alternative is found, playback will stop. You must enter the 4-digit password or change the rating level in order to play the disc. 8 Adult ENTER SETUP Confirm Exit MENU Back 6 The Password Input dialog will appear. Enter a 4-digit password using the [0-9] buttons. - Password - The initial password is `0000`. You must enter this password before you can change the Parental Level. Enter the password with digit keys. 7 Press [SETUP] to exit the menu. Preference Video Audio Parental Control Change Password Auto Setting 1 Kid safe 2G 3 PG 4 PG 13 5 PGR 6R 7 NC 17 8 Adult ENTER SETUP Confirm Exit MENU Back 1 2 3 Press [SETUP]. Use [. . . ] to select `Preference `. Preference Video Audio 1 Kid safe 2G 3 PG 4 PG 13 5 PGR 6R 7 NC 17 8 Adult Back 1 Kid safe 2G 3 PG 4 PG 13 5 PGR 6R 7 NC 17 SETUP 25 DW-R77D1D-JB-I(GB) 2008. 4. 11 1:53 PM ` 26 mac001 1200DPI 90LPI Setup Change Password 1 While `Preference Password`. ` is selected, press [. . . ] to select `Change Preference Video Audio Parental Control Change Password ENTER SETUP 8 Adult Auto Setting Confirm Exit MENU Back 2 3 4 Press [ENTER], then `Input Password' submenu appears. Re-enter the new password. Preference > Change Password Old Password * * * * New Password * * * * Confirm New Password * * - ENTER SETUP Confirm Exit MENU Back · Master Password : If you forget your password, press 3, 3, 0, 8 on the remote control and then press [ENTER]. · Set the new password to something other than '0000'. 26 DW-R77D1D-JB-I(GB) 2008. 4. 11 1:53 PM ` 27 mac001 1200DPI 90LPI Setup Auto Setting 1 2 3 4 Press [SETUP]. Use [. . . ] to select `Preference While `Preference Setting`. `. Preference Video Audio Parental Control Change Password Auto Setting ENTER SETUP ` is selected, press [. . . ] to select `Auto Press [ENTER]. The `Auto Setting` submenu is displayed. Confirm Exit MENU Back Auto Clock Setting Auto Clock Setting VPS/PDC ENTER SETUP Confirm Exit 1 2 Use [. . . ] to select 'Auto Clock Setting' and press []. Use [. . . ] to change the 'Auto Clock Setting' status, and press [ENTER] to confirm. VPS/PDC VPS/PDC VPS/PDC is a service provided by some stations to enable you to perform timer recordings precisely even if the broadcaster delays the start time of the programme slightly. The time you enter is the VPS/PDC time so this must be correct. Not all stations offer VPS/PDC, in which case the player will start at the time you enter and not the actual start time of the programme. If you wish to start recording at a specific time without it being adjusted by the VPS/PDC system in the event of a delay, switch VPS/PDC off otherwise the recorder will not record at the time. Follow the same procedure as `Auto Clock Setting' to set the `VPS/PDC' status. · "VPS/PDC" and "Auto Clock Setting" are not provided for some countries. Preference > Auto Setting Auto Clock Setting ENTER SETUP Confirm Exit Auto Clock enables the DVD Recorder to set the clock automatically whenever it is in Standby mode (plugged in but powered off). Auto Clock is only available for models with the VPS/PDC function. [. . . ] TIMER indicator light does not appear after programming timer. Stereo Audio Record and/or TV is not Stereo-compatible. Broadcast program is not in stereo Playback not present. DVD Recorder A/V Out jacks are not connected to TV A/V In jacks. [. . . ]