User manual DAEWOO DV-K846N

[. . . ] Young children should be supervised to ensure that they do not play with the appliance. ANISM MECH RAPID P LAY REWIN D SYSTEM QUICK START PAL POWER STOP/ EJECT REW FF AUTO SET OP EJECT CH. REC/OTR CHANNEL Do not . . . expose the video recorder to high levels of humidity and heat, to avoid the risk of fire and electric shock. Have a qualified technician carry out repairs. connect the video recorder to the power supply if you have just moved it from a cold to warm environment. [. . . ] Load a cassette with its safety tab in place (see page 13) and with sufficient free space for the recording. STAR T MEC HANIS RAPID M REW FF AUTO SET REC/OTR CHANNEL 20 : 10 Normal timer recording MENU VHS OK How often do you want to record this program?One Time Daily(MON-FRI) Weekly(Once a Week) PR+/-:select OK:confirm Call the video's "MAIN MENU", choose "Timer Program". Decide if you want to record "One Time", "Daily" or "Weekly" . . . and confirm. PR MENU:end OK 1 2 3 1 2 3 TV/VCR 4 5 6 TIMER PROGRAM (One Time) 7 8 9 4 5 6 AV 0 / PR Start Time End Time Start Date ---:---:---/-- 7 8 9 T. R PR / 0 / 00:00 PR+/-:select(AV) 0-9 :setup(PR) / :correct MENU:end Type in one after the other: x the programme location number, x the time the broadcast starts, x the time the broadcast ends, x the day of the broadcast, if it is not today. EJECT SP/LP PR MENU PAL/SEC OK TIMER PROGRAM (One Time) PR 03 Start Time 21:20 End Time 22:20 Start Date 20/09(SUN) OK INDEX PR A. SEL / :correct OK:confirm MENU:end If you wish to make changes: Move to the position you want to change using the / buttons. Change the setting using the PR+/- or number buttons. If all setting are ok, press or , till you see "OK : confirm" in the bottom line. Confirm. TIMER Switch your video off. x x x x Wait a few seconds after typing an one-digit-number. If you have made a mistake, move to the position you want to change using the / buttons and change the setting. If programme timings overlap, the machine will give an warning message. If you don't adjust the times, the machine will record the first programme completely then continue with the second one. The recorder will eject cassettes which have the safety tab removed (page13). 10 DV-K846NY-RG/H_GB(¨ ` ) ¿ 01. 4. 18 6:10 PM ` 11 £ -» º M Timer Review ­ changing and erasing MENU O R E functions TIMER REVIEW PR START END DATE 01 12:30 15:15 22/09 03 21:20 22:20 20/09 PR Call the video's "MAIN MENU", choose "Timer Review". OK PR+/-:select OK:confirm MENU:end PR PR TIMER REVIEW PR START END DATE 01 12:30 15:15 22/09 03 21:20 22:20 20/09 Select the programming to change or erase. OK PR+/-:select OK:confirm MENU:end PR MENU OK TIMER PROGRAM (One Time) PR 03 Start Time 21:20 End Time 22:20 Start Date 20/09(SUN) 0 :erase / :correct MENU:end PR MENU If you want to erase this programming press button 0, confirm with OK. If you wish to make changes: Move to the position you want to change using the / buttons. Change the letters with the PR +/­ buttons, move to the next letter with the / buttons. OK MENU PR01 PR02 PR03 PR04 PR05 MANUAL SET P-01 PRO6 P-06 P-02 PRO7 P-07 P-03 PRO8 P-08 P-04 PRO9 P-09 P-05 PR1O EURO MENU:end Store and exit. PR+/-:select OK:confirm x The video's automatic tuning system usually produces the best results. In poor reception areas, fine tuning may improve reception. Choose the station and tune using the / buttons. Store, typing in the location number again. x Should you wish to tune in all the channels available in your region, please refer to page 5. x Should you wish to sort or clear stations, please refer to page 16. 15 ENGLISH Call this menu (just see the left page), if it isn't displayed. DV-K846NY-RG/H_GB(¨ ` ) ¿ 01. 4. 18 6:10 PM ` 16 £ -» º Tuning in NEW STATIONS EM SYST REW IND P LAY QUICK STAR T MEC HANIS RAPID M STANDBY STOP/ EJECT REW FF REC/OTR CHANNEL Sorting programme locations MENU PR If the location numbers used for programmes stored in your TV and video are different, you can change them on the video. To do this, move the stations to the right numbers, until they are arranged the way you want. 2x OK PR Call the video's "MAIN MENU", choose "VCR Setup", then "PR Preset" then "PR Align". OK PR 1 2 3 TV/VCR 4 5 6 AV OK 7 8 9 T. R PR / 0 / 00:00 PR ALIGN PR01 P-01 PRO6 P-06 PR02 P-02 PRO7 P-07 PR03 P-03 PRO8 P-08 PR04 P-04 PRO9 P-09 PR05 P-05 PR1O ---PR+/-:select :PR view OK:confirm MENU:end Select the programme to swap. Move the station to the desired location number. Confirm. Clearing programme locations MENU EJECT PR SP/LP PR MENU OK 2x PAL/SEC OK Call the video's "MAIN MENU", choose "VCR Setup", then "PR Preset" then "PR Erase". PR INDEX PR A. SEL OK PR OK 2x PR ERASE PR01 P-01 PRO6 P-06 PR02 P-02 PRO7 P-07 PR03 P-03 PRO8 P-08 PR04 P-04 PRO9 P-09 PR05 P-05 PR1O ---PR+/-:select :PR view OK:erase MENU:end Select the station (location number) you want to clear. Clear. 16 DV-K846NY-RG/H_GB(¨ ` ) ¿ 01. 4. 18 6:10 PM ` 17 £ -» º x x If you are using a RCA cable, select the AV input on the TV to see the picture from the video. [. . . ] - is there an object blocking the direct line between remote control and video?If so, the video's display will indicate it. Recording doesn't start the cassette starts playback or is ejected Playback no picture poor picture quality poor still picture Remote control doesn't work? General a cassette won't load the cassette won't rewind, fast forward, play or record - the cassette is already fully wound back or to the end. mode timer is recording incorrectly a loud noise when left in Stop mode - is the clock set correctly (page 5/9)?- if no play or record function is used for about five minutes when left in Stop mode, the video switches its motor off to conserve the mechanism. [. . . ]