User manual DAEWOO DV-K84N

[. . . ] Video Cassette Recorder User's Guide DVK84N As an ENERGY STAR® Partner, DAEWOO has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. Safety information CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and servicing instructions in the literature accompanying the appliance. [. . . ] 3 Press 4 to process Cable Box setup Adding channels to memory If you have removed a channel from memory, you can easily add it back again. To add channels: 1 Use 0-9 to tune to the channel you would like to add. 3 Press 3 to select Channel Set. 4 When you make a timer recording, the preset channel number will be displayed automatically. Press the channel number (01~13) or input key which matches to the output of the Cable Box to connect between Cable Box and VCR. 5 6 Press CLEAR on the remote to correct setup status. 7 Press MENU to exit the menu system. 16 Daewoo Video Cassette Recorder User's Guide Daewoo Video Cassette Recorder User's Guide 17 Using video cassettes Audio-visual material may include works of copyright which must not be recorded without authorization of the copyright owner. If you insert a video cassette without a safety tab into the VCR: ·After setting the timer recording program, " " will blink on the display panel in the power off mode and the VCR will automatically eject the cassette. · In the power on mode, the VCR will playback automatically If you insert a video cassette with a safety tab intact into the VCR: · After setting the timer recording program, the VCR will be stand-by mode in power off mode. Before you play or record on a video cassette tape, be certain to read this information on the proper care and use of video cassettes. Only use video cassettes that bear the VHS mark: . There are four types of video cassettes: T-60, T-90, T-120, and T-160. The amount you can record on a tape is dependent upon the tape speed at which you record. The table below lists the recording time(hours:minutes) for each tape type according to recording speed. Tape Type T-60 T-90 T-120 T-160 SP Mode (Standard Play) 1:00 1:30 2:00 2:40 EP Mode (Extended Play) 3:00 4:30 6:00 8:00 Watching recorded programs To watch a program recorded on a video cassette tape: ·Turn on the television. ·Set the TV to channel 3 or 4 or to the video input. ·Insert a video cassette. Playing a video cassette If the video cassette has no safety tab(e. g. , a rented video cassette), the VCR will automatically play the tape once you insert it. If the VCR does not play the video cassette, press PLAY. Searching forward while viewing a video cassette To search forward on a video cassette, press FF. The video cassette will advance rapidly and display a picture, but no sound. If you repress the FF, the video cassette will advance more rapidly. Press PLAY to return to normal play. Searching backward while viewing a video cassette Protecting video cassettes from accidental erasure Cassettes have a safety tab to prevent erasure. Break off the safety tab with a screw driver. If you wish to record on a cassette without a safety tab, cover the hole with cellophane tape. To search backward on a video cassette, press REW. The video cassette will rewind rapidly and display a picture, but no sound. If you repress the REW, the video casssette will rewind more rapidly. Press PLAY to return to normal play. Pausing a video cassette during playback To temporarily stop playback, press P/S. The picture will freeze and the sound will stop. Press PLAY to return to normal play. ! · Do not attempt to pull out the video cassette once the VCR begins to load the video cassette. [. . . ] Make sure there is no obstruction between the remote control and the VCR. Timer clock does not work. · Make sure the VCR is plugged in and receiving power. · If the unit has been without power for some period of time, you must reset the clock and all your timer programs. Video cassette won't go into the cassette compartment. [. . . ]