User manual DAEWOO DVR-S06.PDF

[. . . ] DF-Q74D2N-JS 2005. 12. 8 5:8 PM `A mac001 1200DPI 90LPI DVD Recorder + VCR DVR-S06 User Manual P/N : 97P95600N0-G5 DF-Q74D2N-JS 2005. 12. 8 5:8 PM `i mac001 1200DPI 90LPI Important Safeguards CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated `dangerous voltage` within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and servicing instructions in the literature accompanying the appliance. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. ATTENTION POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU'AU FOND. WARNING: Do not install this equipment in a confined space such as a bookcase or similar unit. CLASS 1 KLASSE 1 LUOKAN 1 KLASS 1 CLASSE 1 LASER PRODUCT LASER PRODUKT LASER LAITE LASER APPARAT PRODUIT LASER NOTE TO CABLE/TV INSTALLER: This reminder is provided to call the cable TV system installer's attention to Article 820-40 of the National Electric Code (U. S. A. ). [. . . ] Audio Effect : Shows the current audio effect, and changes the setting; L-Mono, R-Mono, Stereo or Mix-Mono 0:00:41 Off Sound Effect : Shows the current sound effect, and changes the setting; Off, Concert, Living Room, Hall, Bathroom, Cave, Area or Church Repeat : Shows the current repeat mode, and changes the setting; Track, All or Off A-B Repeat : Shows the current A-B repeat mode, and changes the setting; A-, A-B or Off Random Repeat : Shows the current random repeat mode, and changes the setting; On or Off OSD Language : Shows the current OSD language, and changes the setting; English, French or Spanish PLAYBACK Off Off Off 1 29 DF-Q74D2N-JS 2005. 12. 8 5:8 PM ` 30 mac001 1200DPI 90LPI On-Screen Display Overview Displaying TV Information While watching TV, press [DISPLAY] to display/remove the on-screen display. If no rewritable DVD disc is inserted, you would see a screen like the following: If a DVD+R or DVD+RW disc is inserted, the disc information is displayed at the first button press. DVD-Video CH-6 02:26 AM I STOP Displaying VCR Information The On-Screen Display provides feedback on the status of the DVD Recorder+VCR and/or the currently loaded tape. To access the On-Screen Display (or OSD), press the [DISPLAY] button. CH-6 02:26 AM I STOP Changing the TV Audio Channel Some TV programs are broadcast with both a main and a Secondary Audio Program (SAP). You can change the TV audio using the [AUDIO] button. Press [AUDIO] repeatedly to change the TV audio, according to the Broadcast audio signal as shown below. · STEREO+SAP Audio Signal : Stereo Mono SAP Stereo · STEREO Audio Signal : Stereo Mono Stereo · SAP Audio Signal : Mono SAP Mono · MONO Audio Signal : Mono The current audio channel is displayed on-screen. · If SAP is selected, but there is no SAP channel being broadcast, you will still hear the main audio channel. · If the sound is poor quality when set to Stereo, you can often improve it by changing to Mono. · When an external input is selected, the audio channel can be switched only to Stereo. Changing TV Channels If no disc is playing, you can change TV channels using the [0-9] or [CH +/-] buttons on the remote control or [CH . . . /] buttons on the front panel. Antenna channels are numbered 2 through 69. Cable channels are numbered 1 through 125. 30 DF-Q74D2N-JS 2005. 12. 8 5:8 PM ` 31 mac001 1200DPI 90LPI DVD Playback Before You Begin 1 2 Press the [DVD] button to set the remote control to operate the DVD deck. Turn the TV on and select the video input source connected to the DVD Recorder+VCR. Audio system: Turn the audio system on and select the input source connected to the DVD Recorder+VCR. DVD Selected Actions are now for DVD I Stop Playing a DVD 1 Press [EJECT] to open the disc tray. 2 Load your disc in the tray with the playback side down (label side up). 4 READING appears on the front panel display, and playback starts automatically. If playback does not start, press [PLAY ()]. In some cases, the Disc menu might appear instead. PLAYBACK Playing a DVD+R (+RW, -R, -RW) When a DVD+RW or unfinalized DVD+R (-R, -RW) is inserted, no title is played automatically but the current TV channel displays on the screen. 1 If you want to play a title on the DVD+R (+RW, -R, -RW), you must press [MENU] or [PLAY] to display the disc menu of a thumbnail index for each recorded title on the disc. The index picture screen of the title will be displayed. Also title information (name of recording, recorded day, time, recording quality) will be displayed. TITLE CH10 10:29AM 12/21/04 0:01:00SEP TITLE CH10 10:34AM 12/25/04 0:01:00HQ EMPTY 1:50:54SP G Press REC to overwrite title(s). 2 Select a title to play using [oe ] then press [ENTER] or [PLAY]. If a Disc menu is displayed · A Disc menu may be displayed when you load a DVD. Use the [oe . . . ] buttons to select the title/chapter you want to view, then press [ENTER] to start playback. Press [TITLE] or [MENU] to return to the Disc menu. · If the Parental Level feature is set and the disc is below the current Parental Level setting, the 4-digit code must be entered and/or the disc must be authorized; see `Set Parental Level` on page 24. · The DVD Recorder+VCR will not play discs with Region codes different from the DVD Recorder+VCR. The Region code for this DVD Recorder+VCR is 1 (one). · Unless stated otherwise, all operations described below use the remote control. [. . . ] Point the remote control at the remote sensor of the DVD Recorder+VCR. Operate the remote control within 23 ft (7m). Remove the obstacle. 54 DF-Q74D2N-JS 2005. 12. 8 5:8 PM ` 55 mac001 1200DPI 90LPI Troubleshooting Symptom Cause The batteries in the remote control are dead. The DVD Recorder+VCR is in the abnormal status. [. . . ]