User manual DAEWOO RCP-1000

[. . . ] Close attention is necessary when used by or near children. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return it to a service center. Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges of corners. To unplug, grasp the plug, not the cord. [. . . ] · Fit the dusting brush or crevice nozzle onto the end of the handle grip or the extension wand. Crevice nozzle Extension wand Extension wand button EXTENSION WAND · Press the button in the direction shown by the arrows or pull (or push) out the wand. Handle grip Suction control Dusting brush Tool clip Tool clip Main floor nozzle HOSE INSTALLATION /REMOVAL · Hold the hose and match tabs to align with slot inlets of the vacuum cleaner. Push firmly until hose locks into place. · To remove hose, press the button on the hose, then pull the hose out of the vacuum cleaner. CORD REWIN 3 CAAC RCP-1000 EN 7/13/07 2:17 PM Page 5 SUCTION CONTROL · Adjust the suction power by using the switch on the handle grip. · The power is max by pushing up the swich. · The power is off by taking down the swich. POWER CORD · Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord. Plug Cord Dust full indicator Cord rewind button DUST FULL INDICATOR · This red is on which means the dust container(or the cloth bag) is full or the filter in the dust container is blocked by the dust. Please empty the cloth bag and clean the filter. Red ORD REWIND BUTTON · Pull out the power cord to the desired length. · Do not pull out past the red tape. · To rewind the power cord, push down on the cord rewind button. Hold the plug while the power cord is rewinding to prevent the power cord from whipping. CLOTH BAG · The cloth bag needs emptying when the dust full indicator is red or the suction power is weak. 4 CAAC RCP-1000 EN 7/13/07 2:17 PM Page 6 NAMES OF PARTS AND USING FOR PET CLEANER INSTALLATION/REMOVAL · Hold the hose and match tabs to align with slot inlets of the dust container. · Insert the hose and rotate it in the clockwise direction. Push firmly until hose locks into place. SUCTION CONTROL · Adjust the suction power by using the switch on the dust container. · The power is max by rotating the switch in the clockwise direction. · The power is off by rotating the swich in the counter-clockwise. Dust container Slot inlet Hose Dust container · Hold the dust container and match tabs to align with slot inlets of the vacuum cleaner. Push firmly until container locks into place. · To remove it, press the button on the dust container, then pull it out of the vacuum cleaner. Suction control switch Hose Pet brush PET BRUSH · Choose any of the direction for the pet brush to meet your cleaning needs. · When use the pet brush, take care the suction power. The pet dislikes a strong suction power. Dust container Rotation 5 CAAC RCP-1000 EN 7/13/07 2:17 PM Page 7 USING THE MAIN FLOOR PET TURBO NOZZLE · Choose the extension wand or handle grip to meet your various cleaning needs. · Then connect the main floor nozzles to the extension wand or the handle grip. When you connect, push firmly until the floor nozzle lock into place. To remove the main floor nozzles, press the button, then pull out of the wand(or handle grip). Handle grip Main floor nozzle Extension wand · Adjust the suction power or the speed of brush by using the air valve. · Never use the pet turbo brush for the pet. [. . . ] · Dry the filter in the shade. Note · If not dry out the washable filter, do not use the vacuum cleaner. The wet washable filter make the vacuum cleaner trouble. 10 CAAC RCP-1000 EN 7/13/07 2:17 PM Page 12 BEFORE ASKING FOR SERVICE PROBLEM POSSIBLE REASON POSSIBLE SOLUTION 1. Review "Emptying the cloth bag" 2. Remove nozzle ; Check hose; remove obstruction. [. . . ]