User manual DAEWOO SD-9800D

[. . . ] English DVD-VIDEO PLAYER INSTRUCTION MANUAL SD-9800D - Region code of DVD/Video player is region "2" or ALL. Inserting a disc with another region code, it will not operate. Please only use a disc with region code 2 or ALL. If this mark is displayed in operating the product, please wait for a while, then use it. [. . . ] · The recorder will eject cassettes which have the safety tab removed. 26 Timer Recording Timer Review ­ changing and erasing 1 2 Call the player's "SETUP", choose "TIMER PROGRAM". TIMER PROGRAM PR 03 01 ------- START END DATE 21:20 22:20 14/06 18:10 -- : --- : --- : --- : --- : --- : -20:30 -- : --- : --- : --- : --- : --- : -20/06 -- / --- / --- / --- / --- / --- / -- PR+/-:SELECT OK:CONFIRM SETUP:END Select the programming to change or erase. If you want to erase this programming press button [0], confirm with OK. If you wish to make changes: Move to the position you want to change using the [< , >] buttons. Change the settings using the [PR +/­] or [number] buttons. If all settings are ok, press [< or >], until you see "OK: CONFIRM" in the bottom line. Exit the menus. TIMER PROGRAM (ONCE) PR START TIME END TIME START DATE TAPE SPEED 03 21:20 22:20 14/06(SAT) SP 0 :ERASE </>:CORRECT SETUP:END VCR Operation 27 More Functions s The counter counts in real time from the point you load the cassette. The counter does not count unrecorded parts of the tape. s If you rewind beyond the zero position, the counter counts in negative values (e. g. ­ 0:01:15). Clock / counter display Each time you press [DISPLAY] button, 1x: Time and date+current status Time and date 2x: Counter+current status counter 3x: disappear. But if you press [CLK/CNT] button, clock and counter on display window will change each other. · If didn't wind tape (PLAY, FF, REW, . . . ), it doesn't appear the tape remain time. STOP SP PR01 ARD STEREO ON 14:00 08/06 E180 00:48 Remaining time and cassette length TAPE CONTROL TAPE REMAIN GO TO ZERO COUNTER RESET INDEX+ INDEX- TAPE REMAIN E-180 E-240 E-300 PR+/-:SELECT OK:CONFIRM SETUP:END PR+/-:SELECT OK:CONFIRM SETUP:END E-240 01:27 Call the player's "SETUP", choose "TAPE CONTROL" · Remaining time display is only possible when the cassette is loaded. When you want the player to show the time remaining from the current player tape position (to find out if there is sufficient space for a recording, for example). To ensure the remaining time shown is accurate, select the length of cassette currently loaded by selecting this function until you reach the correct length. Searching a recorded program with index (VISS) When you record a program, the VCR places an index mark at the start of the recording. Call the player's "SETUP", choose "TAPE CONTROL" 2. Choose index + to search forward or index - to search backward. The player will locate your index mark and begin playback. TAPE CONTROL TAPE REMAIN GO TO ZERO COUNTER RESET INDEX+ INDEXPR+/-:SELECT OK:CONFIRM SETUP:END Accessing counter zero position The player will wind to the position 0:00:00 and stop. REW SP GO TO ZERO Resetting the counter to zero COUNTER RESET 0:02:13 Reset the counter. 0:00:00 28 More Functions and . . . Dimmer : Your player dims its display when switched to stand-by mode. Auto power off : Your player switches to stand-by when no tape is played and no station is received for more than 5 minutes. AUTO REPEAT If you press the [PLAY] button for 5secs during stop or still mode, it goes Auto repeat mode. This player plays repeatedly the tape from the beginning to end parts. To release this mode, press the [ ] button or mode operation button. (PLAY, FF, REW or STOP) SETUP languages Call the player's "SETUP", choose "VCR SETUP", then "LANGUAGE SET". Confirm. LANGUAGE SET ENGLISH PYCCKNZ ÔESKY MAGYAR PR+/-:SELECT OK:CONFIRM VCR Operation SETUP:END Child lock Press the [ ] button for about 5 seconds. No buttons of front panel can be operated now and LOCK INDICATOR ("LOCK") will be displayed on window display. Keep your remote control in a safe place. [. . . ] Checks If a DVD is from overseas, it may not be played. Please check a DVD's region code whether it has the relative region code 2 or All. Please check whether a DVD is inserted in a right direction. If it is a CD-ROM for PC or DVD-ROM, it does not work. [. . . ]