User manual DAEWOO SG-7942

[. . . ] Time Lapse Video Cassette Recorder User's Guide SG-7942 Be sure to read carefully and follow all the SAFETY INFORMATION on pages i, ii, iii. Keep the manual in a safe place for future reference. Safety information CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. [. . . ] to "L-Bottom (or R-Bottom). · If one of 4 items is set, the position of 4 items is changed identically. · A tape recorded on this VCR cannot be played back on another make of time lapse VCR. · If you press on the REC button and the loaded cassette has no erasureprevention tab, the VCR will eject the cassette. · During recording, the Menu button will not function (the menu cannot be accessed). 4 Press the REC button. · The "REC" indicator is displayed on the display panel and recording starts. 5 To stop recording, press the STOP button. <Recording Speed> Recording Recording Rec. Audio Recording Speeds & Duration TFields RecordDuration TIntervals 160 / Sec. ing 120 2(SP) 2. 67 1/60 Sec 60 YES 6(EP) 8 1/60 Sec 60 YES 18(EP) 24 3/60 Sec 20 YES 24(SP) 32 12/60 Sec 5 NO 36(SP) 48 18/60 Sec 3. 3 NO (SP) means to be recorded by SP heads. (EP) means to be recorded by EP heads. 9 Press the SET - (or +) button to set the position of counter, title to "C-Top" (or "R-Top" or "L-Top") If one of 2 items is set, the position of 2 items is changed identically. L-Top / C-Top / R-Top : Left Top / Center Top / Right Top L-Bottom / R-Bottom : Left Bottom / Right Bottom 10 Press the MENU button three times, the normal screen is displayed. The setting procedure is now complete. Tape Motion Continuous Continuous Continuous Intermittent Intermittent · If you playback the recorded part where recording check was performed, noise may appear. · If you change the recording speed during recording, noise or missing signal may result. Record Pause · During pause, the image appears on-screen but it is not recorded. · If a recording pause continues for 5 minutes or more, the VCR will go into stop mode to avoid damage to the tape. Recording can be interrupted temporarily. 1 Press the PAUSE/STILL button during recording. · The "REC" and " display panel. " indicators are displayed on the 2 To resume recording, press the REC button, or press the PAUSE/STILL button again. 14 13 Time Lapse Video Cassette Recorder Time Lapse Video Cassette Recorder Program Timer Recording There are two program timer recording methods, daily recording or recording on certain days of multiple weeks (weekly recording). · If the set stop time is earlier than or the same time as the set start time, the VCR will consider the stop time to be the following day. 9 Press the SET - (or +) button to set the recording stop minutes(ex : 00), then press the SHIFT button. 10 Press the SET - (or +) button to select the recording speed(ex : 18), then press the SHIFT button. · The cursor is moved to the N/Y position. Example 1 : To record on every Thursday from 10 : 00 to 18 : 00 , in 18-hour mode (recording speed) 1 2 3 Make sure that the set date and time are correct. Load a cassette tape with erasure prevention tab in place. Press the MENU, SHIFT , SHIFT , SHIFT buttons in sequence to display the TIMER PROGRAM SET(1) menu. 11 Press the SET - (or +) button to select "Y". recording will not take place Programmed timer recording Example 1 · The white block cursor is on "SUN"(Sunday). 4 5 6 Press the SHIFT button, until the cursor is on "THU". Press the SHIFT button. · The cursor is moved to the recording start hour position. · Repeat steps 4 to 13 to program timer recordings for other days of the week. · To set two or more timer recordings the same day of the week, press the SHIFT button, until the cursor is located in the day of the week for the second recording, then press the SET - (or +) button, to set the desired day of the week. With each press of the SET - ( or +) button, the day will change as indicated below. Press the SET - (or +) button to set the recording start hour(ex : 10), then press the SHIFT button. · The cursor is moved to the recording start minutes position. SET - : direction , SET + : direction 7 Press the SET - (or +) button to set the recording start minute (ex : 00), then the SHIFT button. · The cursor is moved to the recording stop hour position. 8 Press the SET - (or +) button to set the recording stop hour(ex : 18), then press the SHIFT button. · The cursor is moved to the recording stop minutes position. 15 Time Lapse Video Cassette Recorder Time Lapse Video Cassette Recorder 16 12 Press the MENU button three times, the normal screen is displayed. 13 Press the POWER/TIMER button. · To modify, cancel timer recording, press the POWER/TIMER button to cancel the timer recording mode. To Cancel a Program Timer Recording 1 2 Repeat step 1 above. Press the SHIFT (or ) button until the cursor is located in the "Y" corresponding to the timer recording to cancel. [. . . ] The unit is not set to timer recording stand-by mode. "N" is selected for the TIMER PROGRAM SET. Alarm recording. "NO" is selected for alarm recording in - Be sure to select "YES" for alarm the ALARM REC SET menu. The tracking adjustment is in the wrong. [. . . ]