User manual DAEWOO SV-871.GB

[. . . ] WORTH knowing Please keep the video's guarantee sheet and receipt for your video in a safe place. Before you do anything with the video, please read the chapter "Setting up the video". Precautions x x x x x x Contents x AUTO SET CH. OP EJECT x x x Read this booklet carefully. Make sure the rating of your household electricity supply matches that shown on the back of the video recorder. Read this page and the chapter and the "Setting up your video" to help you set up and adjust your video recorder. Do not put the video recorder in a hot or humid place (to avoid the risk of fire and electric shock). [. . . ] This video repeatedly plays the tape from beginning to end . To release this mode, press any mode operation button such as PLAY, FF, REW or STOP. STOP SP PR01 ARD STEREO ON Child lock VCR Press to start your recording. You can only set the child lock with your remote control. Press the button for about 5 seconds. No buttons of front panel can be operated now and LOCK INDICATOR ("SAFE") will be displayed momentarily on LED display. Keep your remote control in a safe place. To release child lock, press any button of the remote control. These buttons are used on the following two pages. Press if you want to stop the recording for a short while. VCR Press VCR to continue recording. to stop your recording. Press One-touch recording-OTR VCR Press PR+ or PR- to choose the station you want to record. Every time you press , the recording time will increase by 30 minutes. It is possible to record for up to 10 hours if there is enough room on the cassette. · To cancel OTR press and hold the STOP button for about five seconds until the video stops recording. · If you want to record from other equipment that is connected to your video, see pages 3, 4, 5 and 10. 18 19 Timer recording using ShowView ShowView is an automatic system which makes it easier to set the timer. x x For timer recordings, clock, date, and stations must be set correctly. Load a cassette with its safety tab in place (see page 25) and with enough free tape for the recording. 1 SHOWVIEW 83077---0-9:SHOWVIEW NUMBER :CORRECT OK:CONFIRM MENU:END Press PROG. (If ShowView mode does not appear on the screen, it is not available on your video. ShowView numbers are shown in TV guides. From your current TV guide, type in the number next to the programme you want to record using the number buttons 0-9. Press PR+ or PR- to select how often you want to make the recording, for example, once, weekly and so on. If you wish to change any details: Move to the details you want to change using the / buttons. Change the setting using the PR+ or PR- or number buttons 0-9. Normal timer recording Press MENU. Choose "Timer Program" by pressing OK. There are positions for eight timer programs. Press PR+ or PR- to select an unused program, for example `- - - -' then press OK to confirm. Press PR+ or PR- to select how often you want to make the recording, for example, once, weekly and so on. Press OK to confirm. x TIMER PROGRAM (ONCE) PR -START TIME --:-END TIME --:-START DATE --/-TAPE SPEED SP VPS/PDC OFF PR+/-:SELECT (AV1/AV2) 0-9 :SETUP(PR) / :CORRECT MENU:END 1 HOW OFTEN DO YOU WANT TO RECORD THIS PROGRAM? ONCE WEEKLY(ONCE A WEEK) DAILY(MON-FRI) DAILY(MON-SAT) DAILY(MON-SUN) 2 HOW OFTEN DO YOU WANT TO RECORD THIS PROGRAM? ONCE WEEKLY(ONCE A WEEK) DAILY(MON-FRI) DAILY(MON-SAT) DAILY(MON-SUN) PR+/-:SELECT OK:CONFIRM MENU:END PR+/-:SELECT OK:CONFIRM MENU:END 3 PR 03 START TIME 21:20 END TIME 22:20 START DATE 14/09(WED) TAPE SPEED SP VPS/PDC ON PR+/-:SELECT (AV1/AV2) 0-9 : SETUP (PR) / :CORRECT OK:CONFIRM MENU:END TIMER PROGRAM (ONCE) If all the settings are correct, press OK. The on screen display will remind you to enter a cassette and turn the video off. Press to switch your video off. Your video will not record unless you do this. [. . . ] Before you connect the video equipment make sure all equipment is switched off at the plug. Stage 1. Connecting the video to your TV A Fit the batteries into the remote control. Make sure that the (+) and (-) marks on the batteries agree with the (+) and (-) marks inside the battery compartment. B Plug your aerial into the ANT IN socket of the video. [. . . ]