Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual DAHON CIAO. We hope that this DAHON CIAO user guide will be useful to you.
Lastmanuals help download the user guide DAHON CIAO.
Detailed instructions for use are in the User's Guide.
[. . . ] Failure to follow the installation instructions may cause serious bodily injury and will void any warranties, expressed or implied. function: The function of the ATS System includes: - The ability to micro-adjust your stem height easily. - No headset re-adjustment after changing your stem height. [. . . ] - No headset re-adjustment after changing your stem height. - No loose headset parts when traveling with your bike. The stem then slides over the shim and is tightened along the shim length (Fig. To adjust the stem, simply loosen the stem bolt, move the stem to your selected position, then retighten the stem bolt. Determine where to cut steer tube by sliding the ATS shim over steer tube and resting it against the completely installed headset. Be sure to compensate for this added height when determining where to cut your steer tube. Remove ATS shim and cut steer tube using an appropriate method. Use a marker to blacken the cut edge surface of the ATS shim. If the steer tube compression device is near or above the cut mark, drive the compression device lower in the steer tube. Some carbon steer tube compression devices may need to be removed completely then reinstalled after the steerer is cut. Clamp the ATS shim cutting tool over the shim and steer tube with the saw blade slot over the cut mark (Fig. Cut steer tube using an appropriate cutting blade. The NVO stem should never be clamped less than 1mm below the top of the ATS shim. If you experience any looseness in the steering, loosen the rear stem clamp bolt before adjusting headset preload. [. . . ] Cut steer tube using an appropriate cutting blade. The NVO stem should never be clamped less than 1mm below the top of the ATS shim. If you experience any looseness in the steering, loosen the rear stem clamp bolt before adjusting headset preload. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE DAHON CIAO
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual DAHON CIAO will begin.
