User manual DAIKIN BRC1A61

[. . . ] Please keep this manual in a safe place for future reference. DAIKIN AUSTRALIA PTY. LIMITED SAFETY CONSIDERATIONS ! We recommend that you read this instruction manual carefully before use to gain full advantage of the functions of the air conditioner and to avoid malfunction due to mishandling. This air conditioner comes under the term "appliances not accessible to the general public". The precautions described below are WARNING and CAUTION. These are very important precautions concerning safety. [. . . ] Press the MODE SELECTION BUTTON (20) (if required) until the HEAT MODE INDICATOR ( ) is displayed. Select the desired room temperature (if required) by momentarily pressing on up or down arrow TEMPERATURE SET BUTTON's (17) until the desired temperature is displayed. Each press of the button will increase or decrease the desired temperature by 1 degree. The desired temperature may be set in the range of 16 - 32 degrees. Press the ON / OFF BUTTON (1) to commence operation. The OPERATION INDICATOR (2) will illuminate. 6 ) When the AUTO MODE is selected either the COOL or HEAT MODE INDICATOR will also be displayed along with the most recent temperature setting. if the last adjustment you made was to set the cooling mode temperature to 23° then when you select the AUTO MODE it will display AUTO COOLING at a temperature of 23°). The air conditioner will then measure the room temperature and select the applicable mode (ie. heating or cooling) based on the current and desired room temperature. 2. Adjust the desired room temperature (if required) by momentarily pressing on the up or down arrow TEMPERATURE SET BUTTON's (17) until the desired temperature is displayed. Each press of the button will increase or decrease the desired temperature by 1 degree. Select the desired START/STOP TIME by momentarily pressing on the up or down arrow PROGRAM TIME BUTTON's (16) until the desired elapsed time is displayed. Each press of the button will increase or decrease the elapsed time by 1hour. Once the desired START/STOP TIME is displayed press the PROGRAM TIMER ON/OFF BUTTON (14). The PROGRAM START or STOP TIME INDICATOR (7) will stop flashing and remain displayed. Operate the air conditioner in the desired mode as described above. The PROGRAM START/STOP TIME INDICATOR (7) will count down towards zero. When zero is reached the air conditioner will start or stop operating depending on the program set. 7 FAN MODE (see Fig. 2) When the air conditioner is operated in the FAN MODE only the indoor fan is energised. The outdoor unit will not operate and therefore heating or cooling will not be provided. This mode is useful for circulating the air within the building. Press the MODE SELECTION BUTTON (20) (if required) until the FAN MODE INDICATOR ( ) is displayed. [. . . ] Do not use gasoline, benzene, thinner, polishing powder, liquid insecticide. It may cause an electric shock or a fire. MAINTENANCE OF THE OUTDOOR UNIT ! USER MAINTENANCE IMPORTANT! !NO USER SERVICEABLE PARTS ARE INSIDE THE Regularly inspect the outdoor unit to ensure the heat exchanger coil (aluminium fins) and fan outlet are not obstructed by vegetation or any other foreign objects. Clean the outdoor unit heat exchanger coil annually or as required by location or outdoor air quality. [. . . ]