User manual DAIKIN BRC1B61

[. . . ] Features and functions The BRC1B61 is a state of the art remote controller that offers full control over your installation. 1 BASIC REMOTE CONTROLLER The basic remote controller functions are: · ON/OFF, · operation mode change-over, · temperature adjustment, · air volume adjustment · air flow direction adjustment. 2 CLOCK FUNCTION The clock functions are: · 24 hours real time clock, · day of the week indicator. 3 SCHEDULE TIMER FUNCTION The schedule timer functions are: · a maximum of 5 actions can be programmed for each day of the week (totalling 35 actions), · schedule timer can be enabled/disabled at any time, · linked to a set temperature or a LIMIT operation or an OFF operation, · "last command" overrules previous command until next scheduled command. [. . . ] If so, the heating capacity of the system lowers and the system goes into defrost operation. The indoor unit fan stops and is displayed. After maximum 10 minutes of defrost operation, the system returns to heating operation again. 6 LIMIT OPERATION & Limit operation is an additional mode that enables to keep the room temperature within certain limits. The & icons are displayed to confirm the activation of the limit operation. 7 LEAVE HOME LEAVE HOME is a feature that enables to keep the room temperature above 10°C when the occupants are out. This function will switch on heating if the installation is switched off. In this mode, the controller will automatically switch between heating and cooling as required by the setpoint or limit temperature. 4 COOLING OPERATION In this mode, cooling will be activated as required by the setpoint or limit temperature. Operation Manual operation In manual operation, the user decides about the settings of the installation. The last setting remains active until the user changes it. As the controller can be implemented for a wide variety of installations and features, it might occur that you select a function that is not available on your installation; if this is the case, the message will appear. In this mode, heating will be activated as required by the setpoint or limit temperature. The schedule timer always executes the last command; this means the user can temporarily overrule the last executed programmed action. Refer to "Manual operation" on page 5. Consult your dealer for more information. What will the schedule timer do? If enabled, the schedule timer will execute the programmed actions. It will order the installation to: · cool or heat, depending on the current operation, if applicable; the setpoint will be displayed, Browsing the programmed actions in the schedule timer (read-out only) Refer to figure 2. Browsing the programmed actions of the schedule timer is a sequential process. Only 2 buttons are used to browse the entire schedule timer program. The button is used to start browsing, to display the next programmed action or to exit browsing when displaying the last programmed action. BRC1B61 Remote controller 4PW16770-1 Operation manual 8 The button is used to exit browsing at once (without having to scroll through all programmed actions). Press the button to enter the browse mode, the icon appears, will blink. NOTE Browsing always starts on Monday and ends on Sunday. Continue pressing the button until the day of the week indicator displays the current day (not blinking), you have now quit browsing. NOTE The number of times that the button will have to be pressed to quit browsing depends on the number of programmed actions in the schedule timer. Check the icon. If at least 1 action is programmed for Monday, will appear. [. . . ] is blinking to indicate the selected day, and are steady if actions were copied from Monday to Tuesday, only is displayed if no actions were copied from Monday to Tuesday. 2 I WANT TO EDIT PROGRAMMED ACTIONS Editing programmed actions is easy. Make sure you are not in program mode ( not blinking); if required, press the button to quit program mode. Browse to the programmed actions using the button, select the day and action you want to edit. [. . . ]