User manual DAIKIN INTELLIGENT TOUCH CONTROLLER

[. . . ] Operation Manual 7. 1 Quick Reference Air Conditioner Operation To collectively start/stop the operation of all devices connected to the intelligent Touch Controller To start/stop the operation of devices by group To start/stop the operation of devices by zone To change the operation mode To change the temperature setting 1 See page 14 15 16 17 18 19 20 21 See page See page See page See page To reset the filter or element sign See page To change the direction or fan speed To change the range of operation allowed with remote control See page See page Air Conditioner Operation Monitoring To monitor by zone or by group To monitor detailed information See page See pages 22 23 to 24 System Setup Menu To change the name of a group To change the zone setup To change the schedule setup To calibrate the touch panel To review the history of errors To adjust the contrast of the screen See page See page See pages See page See page See page 26 26 27 29 29 49 to 28 13 intelligent touch Controller 11 Operation Manual ED72-123A 7. 2 7. 2. 1 Air Conditioner Operation Starting/Stopping Operation Collectively Screen 1 Monitoring 1 2 To start/stop the operation of all devices connected Start or stop collectively the operation of devices connected. On the Monitoring screen, operation is allowed with either Zone or Group as the display mode and with either Icon or List as the display type. In the example on the left, the display mode is Group in the collective mode and the display type is Icon. [Procedure] 1. On Screen 1 Monitoring, press the Start All or Stop All button. 1 2 2. [. . . ] Screenleft, Time Setup, which is shown on the appears. Press the or button to and the year, month, day, hour, minute second. 1 4. has been made, press the OK button 1 Screen 2 Confirmation appears. Screen 2 Confirmation 5. If changing the time setting causes no problem, press the OK button 2 . To cancel setting, press the Cancel button. 2 Backlight setup Backlight Setup as described on 1. ScreenonBacklightappears. which is shown the left, Enable 3. or Disable for Backlight Auto 1 Screen 1 Backlight Setup 2 If you select Disabled, go to step 6. For longer service life of the backlight, select Enable whenever the backlight does not need to be illuminated all the time. The backlight once turned OFF is illuminated again when the panel is touched or automatically activated by any error generated in the air conditioner if Enable is selected for 5. Auto On Detect Err. 2 1 1 3 3 4 the or button to set the 4. Set whether the backlightwhen any error automatically turned ON is generated in air conditioners by selecting Enable or Disable 3 . 6. Press the OK button . press the To cancel the setting, 4 Caution Cancel button. 33 intelligent touch Controller 31 Operation Manual ED72-123A Screen 1 Group Setup 2 9 Group setup 1 1 15 10 1. Select30. Screenleft, Group Setup, which is shown on the appears. Screen 2 1 2 11 16 Screen 2 Enter Group Name Use the keyboard on the panel to enter the name in such a way that it is contained in the area 3 . If it is not contained in the area, reduce the number of characters and reenter. [How to use the keyboard] 5 : Button to select between uppercase and lowercase. 6 : Button to correct wrong entries made. Pressing one time deletes one character leftward starting at the cursor. 8 : Button to change the select range of the characters to be converted. 3 5 6 When all entries have been made, press the OK button 4 . Press the Modify Description button 4 and enter the name as shown in step 9 above. 6. Press the Up or Dn button an icon. 7 4 Screen 3 Temp Limit 10 to select 8 The selection of icon does not affect the operation of the group. Screen 3 Select 11 12 13 Yes or No 12 for Limits Setup for the group currently selected. If you select Yes, set the limits by pressing the or button 13 and then press the OK button 14 . Select thefor showing thethe Down or Up position with button group 15 currently selected within the zone. 9. To cancel the setting, press the Cancel button. 34 32 intelligent touch Controller ED72-123A Operation Manual 1 Screen 1 Zone Setup 3 10 Zone setup Zone 1. [. . . ] This indication is shown in the following cases. When compulsory stop command is input to central management devices (central remote controller, ON/OFF controller, etc. ) including the intelligent Touch Controller, the indication appears. Inputting compulsory command stops all air conditioners connected to the central management device. While the command is input, neither the central management devices nor remote control can operate air conditioners. [. . . ]