User manual DANA 4360-101

[. . . ] 5 POWER indicator provides a visual display for the current heat level. 6 ON/OFF button switches the appliance on and off. 7 ON/OFF indicator light shows whether the appliance is on or off. 8 PROGRAMME TIMER* button controls the cooking programme times (see Start-up and use). [. . . ] It may be activated by pressing the button. The indicator light directly above the button will illuminate. This function boosts the power to 3000 W or 4000 W, depending on the size of the relevant cooking zone. The booster stops automatically after 4 minutes. While the booster for one of the cooking zones is active, the corresponding front or rear cooking zone will operate at a reduced power level (e. If the booster for the rear left-hand hotplate has been activated, the power level of the front left-hand hotplate will be reduced). For further information, please refer to the Technical description of the models. All the cooking zones may be programmed simultaneously, for a duration between 1 and 99 minutes. Select the cooking zone using the corresponding selector button. Adjust the power level of the cooking zone. Or button is pressed for an extended period of time, the display scrolls quickly though the power levels and timer minutes. When the 6 seconds have elapsed, the ON/OFF and CONTROLS LOCKED indicator lights will flash for one second. And buttons and press the Release the button; • The display will show the text DE and MO and the hob will be switched off. €¢ When the hob is switched on again it will be set to the “demo” mode. To exit this mode, follow the procedure described above. The display will show the text DE and OF and the hob will be switched off. When it is next switched on, the hob will function normally. At step 2, press the button: the duration decreases progressively until it reaches 0 and switches off. The programme resets and the display exits programming mode. - + - Timer The hob must be switched on. The timer can be used to set a duration up to 99 minutes. Press the programming button until the timer . [. . . ] €¢ Always make sure that pan handles are turned towards the centre of the hob in order to avoid accidental burns. This appliance has been designed and manufactured in compliance with international safety standards. The following warnings are provided for safety reasons and must be read carefully. GB 13 Care and maintenance GB Switching the appliance off Disconnect your appliance from the electricity supply before carrying out any work on it. [. . . ]