Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual DANBY DCR34W BL. We hope that this DANBY DCR34W BL user guide will be useful to you.
Lastmanuals help download the user guide DANBY DCR34W BL.
Detailed instructions for use are in the User's Guide.
[. . . ] W If the appliance has a freezer compartment, now change the compartment door. (see "Changing the compartment door") W Fit the door back in place: at the bottom place door on hinge pin 5, at the top pass hinge pin 3 through outer hole in the hinge into the door bearing and tighten. W Rotate cover parts through 180° and re-attach them to the other side. W Fig. A2: At the hinge 1 fold away the cover. [. . . ] W Fig. A2: At the hinge 1 fold away the cover. Unscrew the hinge 1 and remove the compartment door with the hinge. W Rotate the door and closure by 180° and replace on the other side: Insert the compartment door at the top, put the hinge 1 in place at the bottom, screw down again and close the cover. B: Align the unit with a spirit level and an angle. If necessary, level out by building up from underneath. The shelf and side walls of the unit must be at right-angles to one another. W Fit the refrigerator/freezer in stable kitchen units only. W The following ventilation dimensions must be observed: - The depth of the ventilation channel at the rear of the unit must be at least 38 mm. - There must be a ventilation space of at least 200 cm2 underneath and at the top of the unit. the greater the area the more economically the appliance will run. E: Slide the appliance up to the unit wall (the sealing strip will be compressed). W Fasten/fix the appliance in the recess using chipboard screws bp/bu: through fastening bracket bm at the top Fig. E1, while pressing the appliance against the wall of the unit; at the bottom through adjusting screws co in the hinge 6/7, Fig. WARNING Risk of injury if the door tips!If the bearing parts have not been sufficiently tightened the doorcan tip outwards. In addition the door may not close, meaning that the appliance does not cool properly. W Screw on the bearing brackets/bearing pins tightly to at least4Nm. W Check all of the screws and retighten if necessary. W If necessary, align the equaliser trim bl by moving it parallel to the ceiling of the unit - it must not be proud, Fig. D3. E: Fold in side part of the fastening bracket bm. [. . . ] W Check all of the screws and retighten if necessary. W If necessary, align the equaliser trim bl by moving it parallel to the ceiling of the unit - it must not be proud, Fig. D3. E: Fold in side part of the fastening bracket bm. W Depending on the height of the handle and whether the door is divided or not, fit a door connecting element bq Fig. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE DANBY DCR34W BL
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual DANBY DCR34W BL will begin.
