User manual DANE-ELEC SO SPEAKY HDMI

[. . . ] After-sales service is applicable only if the quality has been respected and under the terms of the guarantee. The company is not responsible for loss of data caused by the product. For technical reasons, the company reserves the right to modify the product's characteristics and presentation without prior notice to the users. 3 1. In order to shorten the search for files, we suggest that you create 3 directories (for example: «music», «photos», and «videos») on the hard disk or on a large capacity memory card and that you place the corresponding files in each directory. [. . . ] Use the Up and Down keys to select a subtitle language available on the DVD. Switches to Video Output mode Displays the media file information. In DVD mode, press this button to display the duration, the title or the chapter being read. Switches to Audio Mode 7 MENU Press once to return to the main menu from the Picture, Video, or Music section. Press twice to return to the Peripheral storage device menu (if there is more than one) Up Down Left Right ENTER Enter / OK Stop Pause / Play Back Next Skip backward Skip forward VOL + VOL REPEAT INTERVAL TIME SLIDE SHOW OTB Music DVD play P/N SR SF Preview On/off Increases the volume Decreases the volume Changes the Repeat mode Changes transition time between images during a slideshow Displays the images in Continuous Mode One Touch Backup ­ Saves the memory card data directly to the hard disk. Only press this button once. Plays music To enter DVD navigation mode Selects the kind of television PAL/ NISC/MUIT-SYSTEM TV Plays DVD in forward slow-motion mode Plays DVD in backward slow-motion mode Selects or deselects the Preview in file mode Note: Before unplugging the cable, turn off your So Speaky HDMI and wait 15 seconds to allow your multimedia hard disk to save its settings. 8 5. USING THE DEVICE The default language setting on your So Speaky HDMI is English. To change the language please follow the instructions below: Turn on your So Speaky HDMI - Press the Setup button on the remote Using the "Up, Down, Left, Right" buttons on your remote select "Set Preference" then "Enter" - Select key "OSD language" Select the desired language - Confirm by pressing "Enter" Press "Setup" to save the change The language is amended 9 5. 1 Connecting the device Connect the device as shown in the illustrations, turn it on and follow the instructions below : Comment : Your So Speaky HDMI's default settings were configured in factory to work with the AudioVideo connection (AV or CVBS). If you want to change the display mode make sure you have first changed your television settings to the desired mode and then change your Speaky HDMI's display mode by clicking the Video button on your remote: Once for the YPbPr/HDMI mode Once for the AV mode (return to AV mode) To use the AV (CVBS) mode: Press the selection key on your television and set it to AV INPUT MODE. If the image does not appear, press the VIDEO button on the So Speaky remote. After a few seconds, press it again until it is set to CVBS mode. The menu will appear on the television screen. 10 MODE DE SORTIE AV 1. To use the YPbPr output mode: Choose YPbPr as the output mode for the television. Press the VIDEO key on the So Speaky HDMI remote to select YPbPr OUT mode. The menu will appear on the television screen. Also connect the AV cable for sound (white and red) since the YPbPr cable only transmits the image. YPbPr OUTPUT MODE (Progressive scan video component) 11 HDMI HDMI Output mode 3. To connect to a television and use the HDMI output: Select HDMI mode, then press the VIDEO key on the remote to switch to HDMI mode. The menu will appear on the television screen. Also connect the AV cable for sound (white and red) since the YPbPr cable only transmits the image. To connect to a HDMI monitor and use the HDMI output: Press the VIDEO key on the remote to switch to HDMI mode. The menu will appear on the television screen. 5. 2 Use of the Memory Card If you insert your memory card (Ex: SD, CF. . . ) before turning on your So Speaky HDMI, the files saved on your So Speaky' HDMI s hard disk as well as those on your memory card will be displayed on the screen. [. . . ] Open "My Computer" to view your external hard drive. If the system does not recognize the player before the cable has been connected, connect the device before launching your operating system. 17 Extraction Procedure : For the security of your player and to ensure that no data is lost, please always follow the procedure below to disconnect your device. Otherwise, an error message will appear on the screen. - Turn off all applications - Click on the Task Bar icon for external storage devices - Select your external hard disk and confirm that you would like it to be stopped - Disconnect the USB cable that connects the So Speaky HDMI to the computer. [. . . ]