User manual DATAVIDEO HRS-10 QUICK START REV 240610

[. . . ] Unplug this unit from the wall outlet before cleaning. Do not place this unit on an unstable cart, stand, or table. The unit may fall, causing serious damage. Slots and openings on the cabinet top, back, and bottom are provided for ventilation. [. . . ] Except as specifically explained elsewhere in this manual, do not attempt to service this product yourself. Opening or removing covers that are marked "Do Not Remove" may expose you to dangerous voltage points or other risks, and will void your warranty. Refer all service issues to qualified service personnel. Unplug this product from the wall outlet and refer to qualified service personnel under the following conditions: a. When the power cord is damaged or frayed; b. When liquid has spilled into the unit; c. When the product has been exposed to rain or water; d. When the product does not operate normally under normal operating conditions. Adjust only those controls that are covered by the operating instructions in this manual; improper adjustment of other controls may result in damage to the unit and may often require extensive work by a qualified technician to restore the unit to normal operation; e. When the product has been dropped or the cabinet has been damaged; f. When the product exhibits a distinct change in performance, indicating a need for service. To avoid any possible static damage to your equipment please ensure your camcorder / deck is switched off when connecting or disconnecting the IEEE-1394 cable. 1 Warranty Standard Warranty Datavideo equipment is guaranteed against any manufacturing defects for one year from the date of purchase. The original purchase invoice or other documentary evidence should be supplied at the time of any request for repair under warranty. Damage caused by accident, misuse, unauthorized repairs, sand, grit or water is not covered by this warranty. All mail or transportation costs including insurance are at the expense of the owner. All other claims of any nature are not covered. Cables & batteries are not covered under warranty. Warranty only valid within the country or region of purchase. [. . . ] Practical features like the integrated carry handle and screen hood ensure the HRS-10HD is usable almost anywhere!To get the most out of your HRS-10HD please read this user manual, and the supplied Monitor and Recorder user manuals to familiarize yourself with its many useful features. 3 Accessing the HRS-10 carry case On each end of the HRS-10HD carry case there are two zips. Open these two zips and then lift the cover end flaps as shown in the images below. 4 HRS-10 Overview Please refer to the individual instruction manual of each item for further details. TLM-700 monitor(Top): displays the Composite (CV) source from DN-400 Front Rear DN-400: Analogue & DV HDD recorder, with 2. 5" Removable HDD Enclosure 5 How to remove the HRS-10 rack from the carry case Separate the three Velcro strips from HRS-10 front side as shown in the image below. Separate the three Velcro strips from HRS-10 rear side as shown in the image below. 6 Slide the HRS-10 rack out from the rear of the carry bag as shown in the image below. 7 How to Remove the TLM-700 Monitor from the HRS-10 Rack Remove the four screws from Left side & right side as shown in the images below. Remove the four screws from Left side & right side as shown in the image below. 8 Remove/cut the cable tie carefully, and then remove the power and composite cables from the Monitor. Carefully slide the TLM-700 monitor out from the rack front as shown in the image below. 9 How to Remove the DN-400 Recorder from the HRS-10 Rack Remove the four screws from Left side & right sides of the rack as shown in the images below. Carefully remove/cut the cable ties, and then remove the power and Composite cables from the recorder. 10 Slide the DN-400 recorder out from the rack front as shown in the image below. Attaching the HRS-10 shoulder carry strap Open the zipped accessory side pocket and take out the strap then attach to the loops provided as shown in the image below. 11 Set up HRS-10 for 45 Degree Viewing Before opening or connecting cables tip the HRS-10 to 90°, and then pull out the Velcro secured stand as shown in the image below. Now place the HRS-10 onto the stand to achieve the new angle, you can now see the monitor at 45°. Specification Please refer to individual instruction manuals for specifications of each product. Case Dimensions: Depth 38 cm Width 34 cm Height 30 cm Total Weight 8. 4 Kg 12 Service & Support It is our goal to make your products ownership a satisfying experience. Our supporting staff is available to assist you in setting up and operating your system. [. . . ]