User manual DAXTEN COMMANDER AUTOVIEW BROCHURE

[. . . ] Installer/User Guide AutoView Commander Installer/User Guide AutoView Commander Installer/User Guide Cybex Computer Products International Ltd. Cybex House Shannon Free Zone Shannon, Co. Clare, Ireland (Tel) 00353 61 471 877 (Fax) 00353 61 471 871 www. cybex. ie ©1999 Cybex Computer Products Corporation. IBM, PC, PC/AT and PS/2 are registered trademarks of International Business Machines Corporation. [. . . ] If you configure an administrator password from this menu, your system will then be in secure mode. A lock symbol will appear to the right of the menu headings to indicate secure operation. If you wish to keep your system in the default non-secure mode, return to the Command Menu. For the differences between secure and non-secure modes, see below. Differences between Secure and Non-Secure Operating Modes Administrator Password Entering an administrator password places your system in secure mode. Non-secure systems do not use passwords. To return your system to the default of non-secure mode, simply delete the administrator password. When the administrator password is enabled, user passwords must also be entered or the switch will not be completely secure. Logoff Capability You have the option of automatically logging off of the system after an administrator defined period of inactivity. Timeout values can be set from 0 to 60 minutes. A value of 0 keeps the user logged in continuously. When the timeout is reached, the current channel is deselected and the display goes to screen saver mode. Users must login again to access system computers. This option is only available in secure mode. Multiple User Logins You can create up to four user logins in addition to the system administrator. Use these logins to configure and control server access for every type of system user. The administrator has full access privileges; additional users can have viewing or viewing with keyboard and mouse control capability for each attached server. This option is only available in secure mode. 20 On-Screen Display Operations Push-Button and Hot-Key Channel Selection While in secure mode, all front panel push-buttons and hot-key channel selection methods are disabled. (This also includes use of the Cybex Remote Switch Panel (RSP)) All other hot-key commands remain operational to the administrator only. In non-secure mode, all pushbuttons and hot-key commands function normally. Creating the Administrator Password 1. Press the Control key twice or type Alt-M to access the Command Menu. Select `Administrator Functions' from the Command Menu. Select `Administrator Password' from the Administrator Menu. [. . . ] When using a backup power supply (UPS), power the computer, AutoView and the monitor off the supply. Unable to change channels using OSD Administrator password is forgotten User password is forgotten General Keyboard/Video Problems System lockup during paired operation If there is no keyboard, mouse or push-button channel selection function, try to bring up the OSD menu. If it activates, reselect your channel and verify that the channel functions normally. If the problem persists, contact Technical Support. If the OSD menu does not activate, verify that the serial cable and video cables are securely attached to both boxes. [. . . ]