User manual DAXTEN SCOUTMICRO DVI INSTALLATION

[. . . ] Keyboard and mouse emulation allows for error free boot-up. The [CAPS LOCK], [SCROLL LOCK] and [NUM LOCK] status is stored for each computer. [. . . ] This is normal and is caused by the synchronization process which ensures that the mouse operates correctly. Keyboard Hot Key commands To send Hot Key commands to the SCOUTmicro kvm switch, press and release Scroll Lock Scroll Lock within 2 seconds, (Note Hot key's are only applicable to PC's). Press a command key for the desired effect. The following commands are supported: First Key Scroll Lock Scroll Lock Scroll Lock Scroll Lock Scroll Lock Scroll Lock Scroll Lock Scroll Lock Scroll Lock Scroll Lock Scroll Lock Scroll Lock Scroll Lock Scroll Lock Second Key Scroll Lock Scroll Lock Scroll Lock Scroll Lock Scroll Lock Scroll Lock Scroll Lock Scroll Lock Scroll Lock Scroll Lock Scroll Lock Scroll Lock Scroll Lock Scroll Lock Command Key 1 or 2 or or S Esc S1 S2 S3 S4 S5 S6 S7 S8 S9 Command Result Switches to the desired PC Switch to previous PC Switch to next PC Auto-Scan mode ON Auto-Scan mode OFF Scan 5 Seconds Scan 10 Seconds (default) Scan 15 Seconds Scan 20 Seconds Scan 25 Seconds Scan 30 Seconds Scan 35 Seconds Scan 40 Seconds Scan 60 Seconds In Auto-Scan mode, the image shown on the monitor will automatically switch to the next computer. The delay is user definable (see Table above). After the last computer has been shown, the first computer will be shown again. Note: In this mode there is no mouse or keyboard control. Press the Esc key to exit the Auto-Scan mode. The SCOUTmicro switch will stop at the last PC shown. The Hot Key sequence can be changed if required. To change from the factory default of Scroll Lock Scroll Lock , please use the following sequence: [OLD HOT KEY] [NEW KEY] for example: Scroll Lock Scroll Lock Caps Lock New Hot Key: Caps Lock Caps Lock The following combinations are available for Hot Keys: Scroll Lock Scroll Lock (default) Caps Lock Caps Lock Num Lock Num Lock Service Information Technical Support If you cannot determine the nature of a problem, please call Daxten and ask for Technical Support. If possible, call from a phone located near the unit, as we may be able to solve your problem directly over the phone. If we cannot solve your problem, and determine that the fault is in the unit, we will issue a Return Material Authorisation (RMA) number that must appear on the outside of all returned products. [. . . ] EXCEPT AS EXPRESSLY PROVIDED ABOVE AND TO THE MAXIMUM EXTENT ALLOWED BY LAW, DAXTEN SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES (INCLUDING WITHOUT LIMITATION, LOSS OF PROFIT, LOSS OF BUSINESS, LOSS OF INFORMATION, FINANCIAL LOSS, PERSONAL INJURY, LOSS OF PRIVACY OR NEGLIGENCE) WHICH MAY BE CAUSED BY OR RELATED TO, DIRECTLY OR INDIRECTLY, THE USE OF A PRODUCT OR SERVICE, THE INABILITY TO USE A PRODUCT OR SERVICE, INADEQUACY OF A PRODUCT OR SERVICE FOR ANY PURPOSE OR USE THEREOF OR BY ANY DEFECT OR DEFICIENCY THEREIN EVEN IF DAXTEN OR AN AUTHORIZED DAXTEN DEALER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSSES. Waste Electrical and Electronic Equipment (WEEE) Within the European this symbol indicates that this product should not be disposed in household waste. [. . . ]