User manual DAXTEN SWITCHVIEW OSD BROCHURE

[. . . ] SwitchView OSD ® Installer/User Guide i INSTRUCTIONS This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. DANGEROUS VOLTAGE This symbol is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. POWER ON This symbol indicates the principle on/off switch is in the on position. POWER OFF This symbol indicates the principle on/off switch is in the off position. PROTECTIVE GROUNDING TERMINAL This symbol indicates a terminal which must be connected to earth ground prior to making any other connections to the equipment. SwitchView® OSD Installer/User Guide Avocent, the Avocent logo, the Power of Being There, SwitchView and AutoView are trademarks or registered trademarks of Avocent Corporation or its affiliates. All other marks are the property of their respective owners. All rights reserved. FCC Notification Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. [. . . ] The administrator has full access privileges; additional users can have viewing or viewing with keyboard and mouse control capability for each attached server. This option is only available in secure mode. Hot-Key Channel Selection While in secure mode, all hot-key channel selection methods are disabled. All other hot-key commands remain operational to the administrator only. In non-secure mode hot-key commands function normally. Chapter 4: On-Screen Display Operations 27 Creating the Administrator Password 1. Press the Control key twice or type Alt-M to access the Command Menu. Select `Administrator Functions' from the Command Menu. Select `Administrator Password' from the Administrator Menu. (The password is not case sensitive. ) 5. Repeat entry of the password for confirmation. CAUTION: Security is enabled once the password has been created. Store a copy of your password in a safe place. You should now see the option `F10 - Logout' at the bottom of your main OSD Window and a lock symbol to the right of the menu headings. Setting the Administrator Logout Time 1. Press the Control key twice or type Alt-M to access the Command Menu. Select `Administrator Functions' from the Command Menu. Select `Administrator Logout Time' from the Administrator Menu. Enter the number of minutes you wish to pass without keyboard/mouse activity before the administrator is automatically logged out of the system. The default of 0 keeps the administrator logged on continuously; 60 is the maximum setting. Setting Up Additional Users 1. Press the Control key twice or type Alt-M to access the Command Menu. Select `Administrator Functions' from the Command Menu. Select `Setup User 1' from the Administrator Menu. Choose the `Name' sub-menu and enter the name for this user. Choose the `Password' sub-menu and enter the password and confirm it for this user. (Passwords are not case sensitive. ) 28 SwitchView OSD Installer/User Guide 6. [. . . ] When using a backup power supply (UPS), power the computer, SwitchView OSD and the monitor off the supply. System lockup during paired operation If there is no keyboard channel selection function, try to bring up the OSD menu. If it activates, reselect your channel and verify that the channel functions normally. If the problem persists, contact Technical Support. If the OSD menu does not activate, verify that the serial cable and video cables are securely attached to both boxes. [. . . ]