User manual DCS (AUDIO) ELGAR AT GUIDE

[. . . ] [. . . ] To select, display or change an option, press "Vol / Bal". Menu First page of the Menu Filter x Selects an optional filter if available Master/Slave Changes the behaviour of the selected input Mute: Sets the Mute fadeout rate Fade Audio fades up during unmuting after relock Dual AES Enables Dual AES operation Filter 1 Filter 2 . . . . Filter n MS:Mast MS:Slav MS:Sync Mute:Nor Mute:Fst Mute:Slw Fade:On Fade:Off Off On Auto Lock PLL Sets the PLL tracking bandwidth TimeOut Sets the Function Menu time-out delay Global Stores global or input-related settings Bal mode Sets the balance display mode Disp Sets the default display Swap Reverse the Left and Right outputs PLL:Fine PLL:Wide Normal Long Vol:Glob Vol:Inp Bal:Bar Bal:Num Bal:dBs Disp:Vol Disp:Fs Disp:Fs+ Disp:Inp Swap:Off Swap:On NAud Controls muting when receiving nonaudio data (e. g. CDROM) NAud:Mut NAud:Ign Use with care! Ch. Check Outputs tone on L channel only then R channel only Ph. Check Outputs noise on both channels then inverts R Burn In Outputs modulated pink noise to burnin your system CAUTION!LOUD! Test Runs a display test routine Issue Displays the software version number 2. 5x Rst Sync Resets all inputs to Slave mode Factory Restores standard factory settings CDUpdate Starts software update from a dCS CD Contact Displays dCS email address Serial Displays the unit full serial number Temp Displays the internal temperature ELG-?-?-?-?-? Celsius Fahrenheit End Closes the Function Menu dCS Ltd. Elgar AT Guide v2. 5x English Software version 2. 5x December 2004 [. . . ] [. . . ]