User manual DE DIETRICH DKP823W

[. . . ] It also includes guidelines for setting up UNIX, Windows NT 4. 0/2000/Server 2003, and Novell NetWare servers to provide printing services to users. · The Printing Guide describes the printing features of the Fiery for users who send jobs from their computers using the EFI PostScript driver. · The Color Guide provides information on managing the color output of the Fiery. It explains how to calibrate your Fiery and take advantage of the ColorWise® color management system, as well as features in ColorWise Pro ToolsTM. [. . . ] Windows 2000: Click Start, choose Settings, and then choose Printers. Windows XP: Click Start, and choose Printers and Faxes. Windows Server 2003: Click Start, choose Control Panel, and then choose Printers and Faxes. Right-click the appropriate printer icon and choose Properties. Click the Installable Options (PS) or Device Options (PCL) tab. Select an installed option from the Available Options list. In the PS driver click Add to move the option to the Installed Options list. This is not necessary in the PCL driver. PS PCL 1 1-30 Installing User Software on a Windows Computer 6. Click OK to activate the current settings. You are ready to connect to your network type (see the next section "Completing the Windows 2000/XP/Server 2003 printer connection"). Configuring installed options and updating print options settings automatically If you have a TCP/IP-enabled network, you can automatically update your printer driver to reflect the options currently installed on the Fiery. When the printer driver is first installed, the installable options have default settings that were set up in Fiery Setup or ColorWise Pro Tools. Click the General tab and click Print Test Page. To share the printer on the network, click the Sharing tab. Select whether to share the printer, and specify the operating systems used by network clients. 5. Click OK to exit the Printer Properties dialog box. 1 1-33 Setting up PostScript or PCL printing with Windows 2000/XP/Server 2003 Completing the Windows 2000/XP/Server 2003 TCP/IP and Port 9100 or LPR connection NOTE: If you installed the driver from the Drivers CD (CD1), this procedure is not necessary. TCP/IP connection will have been set up automatically during the installation. Once you have installed the PostScript and printer driver files, complete the setup for the TCP/IP and LPR connection as follows: · Prepare the Fiery to accept print jobs using TCP/IP and LPR protocols. For details, see Chapter 2 of the Configuration Guide. · Install DE DIETRICH LPR software utility from the Drivers CD (CD1). · Run DE DIETRICH LPR and add the printer by discovery on the network. (See the Help screens with the DE DIETRICH LPR utility. ) Before you continue, contact the system administrator for the IP address assigned to the Fiery, as well as the subnet mask and the gateway address, if they are used. The TCP/IP protocol should already be installed on the Windows 2000/XP/Server 2003 workstation. NOTE: You can also set up the LPR connection by installing Print Services for UNIX, which is supplied as an add-on Windows component with your Windows 2000/XP/Server 2003 CD. For more information, see your Windows documentation. [. . . ] Click OK. For more information, see your Photoshop documentation. 2 2-18 Installing User Software on a Mac OS Computer 3 Chapter 3: Setting Up Fiery WebTools 3-1 Setting up Fiery WebTools Fiery WebTools allow you to manage your Fiery remotely from the Internet or from your company's intranet. The C9800 MFP has its own home page, from which you can select a variety of functions. For more information on using Fiery WebTools, see the Printing Guide. Setting up Fiery WebTools In order for network users to access and use Fiery WebTools, you must set specific Fiery options in Network Setup and Printer Setup. You also must prepare each user's computer to communicate with the Fiery over the Internet or intranet. [. . . ]