User manual DE DIETRICH DOP890XH

[. . . ] 25 To cancel the time set for the minute minder: . 33 To switch "Rapid heat-up" off . 35 Using the residual heat, Energy-save function. 36 2 Contents Setting up User programmes . [. . . ] Cooking processes are then controlled so that the oven will switch off, or on and off automatically. As soon as a cooking function is selected, the word "Duration" will also appear in the display. FAN PLUS 160 °C 9:47 Rapid heat-up phase 31 °C Min minder Duration Selecting "Duration" gives the following input options: Start time, Duration, Finish. FAN PLUS 160 °C 31 °C 9:47 Rapid heat-up phase Start time Duration Finish back A Select Duration and enter the duration of a cooking programme. Once the time set has elapsed, the oven will switch itself off automatically. The maximum length of time which can be set is 12 hours. Select Start time and specifiy the time you want cooking to start. The oven will switch on automatically at the time you have set. Select Finish and specify the time at which you want cooking to end. The oven will switch off automatically at the time you have set. 35 Entering a cooking duration To switch a programme off automatically you can either enter the Duration or just the Finish time. To switch a programme on and off automatically you have three choices: ­ Enter the Duration and Finish time ­ Enter the Start time and the Duration ­ Enter the Start time and the Finish time The time which has not been entered is calculated automatically. The Start time will be shown in the display up until the heating elements are switched on. During the course of the programme you can follow the Duration counting down in the display. You can even put it into the main menu if you wish. See "Changing settings - Main menu". 38 Changing settings The oven is supplied with pre-set standard settings. Those listed in the SETTINGS J menu have alternatives for you to choose from if you wish. Proceed as follows: ^ Switch the oven on. ^ Call up the SETTINGS J menu. SETTINGS F. Back A LANGUAGE F. H ^ Select and confirm the option you want. Currently selected settings are indicated by a tick L next to them. If you do not make a selection in the sub-menu within approx. 20 seconds, the display will revert to the SETTINGS menu. Language J You can set the display to show the language of your choice. SETTINGS F. LANGUAGE F Back A #estina dansk deutsch (A) B H ^ Select and confirm the language you want. The language you have selected will appear in the display. If you have selected the wrong language by mistake you can follow the flag symbol J to get yourself back to the LANGUAGE sub-menu. 39 Changing settings Clock You can select either a 24 hour or 12 hour clock. [. . . ] Connection should be made via a suitable isolator which complies with national and local regulations. The appliance is supplied with a 3-core cable for connection to a 230-240 volt 50 Hz supply. The fuse rating is 20 amps for the "B"-model. The wires are coloured in accordance with the following code: Green/yellow = earth Blue = neutral = live WARNING THIS APPLIANCE MUST BE EARTHED. Brown WARNING THIS APPLIANCE MUST BE EARTHED. 71 Installing the oven The appliance must not be operated until it has been correctly installed in its housing unit. [. . . ]