User manual DE DIETRICH DOP890XS

[. . . ] 25 Entering duration, start time or finish . 26 Using the residual heat, Energy save function . 26 Changing or deleting an entered time . 35 Baking tray, grill pan, anti-splash tray (if fitted), racks and runners . [. . . ] You can use the "Delete character" option to correct any wrong entries. Select "Space" where a space is required. ^ Confirm the programme name with "Save name". 28 To select an existing User programme Select "User programmes" from the main menu and then select the "Select" option. Programmes saved under "User programmes" will appear listed in the display. Scroll to the one you want to use and select it by pressing the button next to it. Select "Continue" and then "Start straight away" or "Start later" and enter the time you want the programme to start. You can save "User programmes" to the main menu if you wish. See "Changing settings ­ main menu" for instructions on how to do this. To change an existing User programme Select "User programmes" from the main menu and then select the "Change" option. Programmes saved under "User programmes" will appear listed in the display. Scroll to the one you want to change and select it by pressing the button next to it. The current time of day will reappear once power has been restored after a power cut. The oven will store this data for approx. After 200 hours the display will show 12:00 and the time will need to be re-set. 29 Changing settings Light The oven interior lighting can be set so that it goes out 15 seconds after a cooking programme has started, or so that it stays on throughout cooking. If this option has been set, the lighting can be switched back on for a further 15 seconds by pressing one of the sensors next to the display. ­ "Factory default" the settings the oven was supplied with will be re-instated. Cooling fan run-on The cooling fan will continue to run for a while after the oven has been switched off to prevent any humidity building up in the oven, on the control panel or in the oven housing unit. The cooling fan is sensor controlled and will switch off automatically. You can change the factory default setting and set the cooling fan to switch off when the temperature in the oven is below about 70 °C or to switch off after a period of about 25 minutes. Do not leave food in the oven to keep it warm if you have set the cooling fan to timed operation. Moisture levels in the oven could increase, leading to condensation forming on the control panel and surrounding kitchen furniture and drops of moisture collecting under the worktop. Condensate can ­ damage the housing unit / worktop. ­ lead to corrosion in the oven. Main menu The first four options in the main menu can be allocated to functions or user programmes which you use more frequently than the pre-set functions. [. . . ] If an automatic programme has started, the "Save as" option will be shown in the display at first. This will change to "SuperVision" after a short time. when the oven is switched off: The time will be shown in the display if none of the signed on appliances are in use. The SuperVision display will appear automatically as soon as a signed on appliance is started. If several appliances of the same type are signed on, these will appear with a number beside them in ascending order, e. g. [. . . ]