User manual DE DIETRICH DTG1138X

[. . . ] 33 EN EN ES 02 34 66 Dear Customer, When you discover De Dietrich products you experience feelings that only PT 102 DE 134 objects of value can arouse. You are immediately attracted as soon as you see them. The quality of the design is illustrated by its timelessness, degree of refinement and elegance, and high standard of finish, resulting in perfect harmony between different appliances. Then comes the irresistible urge to touch. [. . . ] 850 659 51 EN 2 / INSTALLING YOUR APPLIANCE The table below shows where the injectors can be found on your appliance, according to the type of gas used. 63 Example: injector marking 63 MARKINGS ON THE INJECTORS 38 cm hob with auxiliary burner + triple ring burner Natural Gas Butane/ Propane Gas 90A 45 45A 63 38 cm hob with high-power burner Natural Gas 97B 74B 97B 97B Butane/Propane Gas 63B 49B 63B 63B 52 3 / USING YOUR APPLIANCE EN • DESCRIPTION OF YOUR HOB 2-gas burner model with electronic controls (DTG 1138*) B A 1 high-power gas burner model with electronic controls (DTG 1008*) C A B C Auxiliary burner 0. 53 EN 3 /USING YOUR APPLIANCE • DESCRIPTION OF THE CONTROLS (2-burner model DTG1138*) A A B C B On/off touch controls C Power level touch control Timer touch controls • LIGHTING THE GAS BURNERS To use a function touch control. Place your finger squarely on the chosen touch control until the display shows the new setting. Press touch control for the zone you want to use. a flashing 0 display and a beep indicates that the zone is on. If you do not select a power level, the cooking zone will automatically switch off. B • TURNING OFF Press touch control for the zone you want to use or power touch control until 0 is displayed. A • ADJUSTING THE POWER LEVEL Press touch control or to adjust your power level between 1 and 9. When the appliance is switched on, you can move directly to maximum power by pressing touch control or to minimum power with touch control . 54 Tip - You appliance is fitted with a timer. Refer to the paragraph “Using the timer” for details of how it works. 3 / USING YOUR APPLIANCE EN • DESCRIPTION OF THE CONTROLS (1 high-power burner model DTG 1008*) A A B C B On/off touch controls Power level touch control Timer touch controls C • LIGHTING THE GAS BURNERS To use a function touch control. Place your finger squarely on the chosen touch control until the display shows the new setting. You can either use the central burner on its own (controls on the left ), or you can use the entire burner (central burner + outside ring) (controls on the right ). It is not possible to use only the outside ring. The direct access touch controls and on the controls C affect the central burner and the outside ring. Or • ADJUSTING THE POWER LEVEL Press touch control or to adjust your power level between 1 and 9. When the appliance is switched on, you can move directly to maximum power by pressing touch control or to minimum power with touch control . € TURNING OFF Press touch control for the zone you want to use or power touch control until 0 is displayed. tip - Your appliance is fitted with a timer. Refer to the paragraph “Using the timer” for details of how it works. [. . . ] The ignition function is centralised and controls all burners at the same time. ž Lighting the burners: No sparks appear when the touch controls are pressed. ž When lighting a burner, sparks appear on all the burners at the same time. œ Check that the gas inlet pipe is not pinched. [. . . ]