User manual DE DIETRICH DTI 1127 X

[. . . ] By combining the most advanced technologies with the best materials, De Dietrich makes products of the highest quality for the benefit of all those who love cooking. We hope you are extremely satisfied with this new appliance and will be happy to receive your suggestions and to answer your questions. Please contact our customer service department or use our Internet site. We invite you to register your product at www. [. . . ] 05 57 EN 3 / USING YOUR APPLIANCE • USING THE INDEPENDENT TIMER This function allows you to time an event, without cooking. indicator light — Select an unused cooking zone. And the indicator for the selected zone are displayed (Fig. 01 — Set the time either using the timer slider or the “RECOMMENDED” timer touch control. 02 Once set, “ ” becomes fixed and the countdown begins. 03) shows a time of 20 minutes has been selected. € You can stop the timer by selecting the corresponding cooking zone . 03 — In this way you can activate up to 4 independent timers (with the hob turned off). € During the final minute, the countdown is displayed in seconds. 58 3 / USING YOUR APPLIANCE EN • USING THE “ELAPSED TIME” FUNCTION This function displays the time elapsed since the last time the power setting was adjusted on a given burner. € To use this function, press the button (Fig. You will hear a beep and the indicator will start flashing. € After a preset time, the lock will automatically disengage. A double beep sounds and the indicator goes out. 61 EN 3 / USING YOUR APPLIANCE • OPERATING SAFETY • GENERAL STOP — You can stop any gas burners currently operating by pressing touch control . This action cancels locking if this had been programmed. € AUTO-STOP SYSTEM — Should you forget that cooking is in progress, this safety function will automatically turn the hob off after a predefined time (between 1 and 8 hours depending on the power setting). “AS” is displayed and a beep sounds for about 2 minutes. Press on the main selector touch control to delete this information. € TEMPERATURE LIMITER (MODEL DTI1127*) — Each cooking zone is equipped with a safety sensor that constantly monitors the temperature of the bottom of the cookware. If you leave empty cookware on a zone which is turned on, the power will be automatically limited to prevent damage to the cookware or hob. € “SMALL OBJECTS” SAFETY DEVICE (MODEL • PROTECTION AGAINST OVERFLOWS — In case of overflow, or of a metallic object or wet cloth placed on the control buttons, the hob turns itself off, the displays light up and a beep sounds. [. . . ] In all cases, check the following: 68 ERROR CODE WHAT TO DO ✓ Check the hob is correctly connected to the power supply. œ Check that the spark igniters are clean. œ Check that the burners are clean and correctly assembled. The ignition function is centralised and controls all burners at the same time. [. . . ]