User manual DE DIETRICH DTI1200V

[. . . ] Children should be supervised to ensure that they do not play with the appliance WARNING This product is not for use in the USA. Before installing and using this appliance please read the installation guide section of this booklet fully. This guide will help you to quickly familiarise you with all the features of the appliance. Contents EN 1/ 2/ 3/ 4/ 6/ 7/ 10/ Description of your appliance Overview / working principle Quick start guide Product / Safety features explained Cleaning and maintaining your appliance Installation guide Help Guide Description EN DTi714 Total dimensions (L x l) DT714 : 58cm x 51cm Cutout Recess (L' x l') DTi714: 56cm X 49cm Power total connected load 5. 9kw 1 Working Principle A B C Induction coils Glass insulating hob top Ferrous pan base EN The induction principle The principle of induction is based on a magnetic effect. When you place your cookware on a cooking zone and you turn it on, the electronic circuits in your cooking hob produce "induced" currents in the bottom of the cookware which instantly raise its temperature. [. . . ] If you forget cooking is in progress, after a predefined time, this safety function will automatically turn off your hob (from 1 to 10 hours depending on the power setting). "AS" displays and a beep sounds after about 2 minutes. Press on the main selector to delete this information. A beep will confirm your setting. Automatic Pan Detection: detects when a suitable pan is placed on the cooking zone and so eliminates the possibility of the hob being activated accidentally by a non-suitable object. "Small Items" safety. By placing a small object on the area (a ring, a fork, etc), the hob will detect it and not deliver any power. Note: However, several small objects at the same time on a zone could be identified as cookware. In that case, power will be delivered by the hob. Do not place any utensils (spoons, forks, covers, etc) on the cooking zone being used. They will heat up in the same way as cookware: Risk of combustion. 4 Additional Functions and Safety Features EN Child Lock: for added peace of mind, the child lock can be manually activated to prevent accidental start-up. To activate the lock pres the "E" key and hold until a beep is sounded and an indicator appears. To de-activate hold the "E" key until the indicator goes out and a beep sounds. This will lock the controls set on the cooking zones but will allow the stop key to function. Electronic Power Monitor: prevents power surge and de-surge in the event of electrical interference without loss of performance to the hob. Timer Function Each zone of the appliance can be controlled by using the timer function to turn off the zone after a set period of time. Select the zone required and adjust the power as required. press the timer controls "A" and using the "+" or "-"keys select the cooking time required. The appliance will now count down the time and turn off as required. When the time remaining is less than 1 minute the display will indicate seconds remaining. At the end of the time a beep will indicate the end of cooking. The timer function can only be used on one cooking zone at a time. ·For users with heart pacemakers and active implants. The functioning of the hob conforms to current electromagnetic interference standards and thus is in total compliance with legal requirements (89/336/EEC directives). In order to avoid interference be tween your cooking hob and a pacemaker, your pacemaker must be designed and programmed in com pliance with the regulations that apply to it. As we can guarantee the compliance only of our own products, we strongly recommend that you refer to the maker of your device or to your doctor to avoid possible incompatibilities. 5 Cleaning and Maintaining your Appliance EN Preserve your appliance The vitroceramic glass surface is highly resistant, but not unbreakable. Here are some recommendations for increasing its lifetime: - Avoid banging or clattering the cookware. [. . . ] A series of small dashes appears The electronic circuits have across the display or "F7" over heated After turning on a zone the dis play continues to flash EN Ensure the controls are clean and dry and remove any ob jects that cover them Check the ventillation for the appliance is in line with this guide. Use correct pan size for zone enssuring it is compatable with induction (ferrous) The cookware used is either too small for the zone or is unsuitable for induction cooking. The pans make a noise during This is normal for some types Nothing. There is no risk to cooking and the hob produces a of cookware. [. . . ]