User manual DEI AUTOMATE 210D Owners/installation Guide

[. . . ] 210D O Owner's/Installation Guide limited lifetime consumer warranty For a period of one calendar year from the date of purchase of this auto-security device, Directed Electronics, Inc. promises to the ORIGINAL PURCHASER to repair or replace (with a comparable reconditioned model), free of cost, any electronic control module which proves to be defective in workmanship or material under normal use, SO LONG AS THE SYSTEM WAS SOLD, INSTALLED, AND SERVICED BY A PROFESSIONAL AUTO INSTALLER, AND REMAINS IN THE CAR IN WHICH THE SYSTEM WAS ORIGINALLY INSTALLED. If warranty service is necessary you must have a clear copy of your sales receipt containing all of the information shown on the following page. After the first calendar year, from the date of purchase of this auto-security device, Directed Electronics, Inc. , promises to the ORIGINAL PURCHASER to repair or replace (with a comparable reconditioned model) any electronic control module which proves to be defective in workmanship or material under normal use FOR A CHARGE OF $45. 00, SO LONG AS THE SYSTEM WAS SOLD, INSTALLED, AND SERVICED BY A PROFESSIONAL AUTO INSTALLER, AND REMAINS IN THE CAR IN WHICH THE SYSTEM WAS ORIGINALLY INSTALLED. [. . . ] Do not release the Valet®/Program switch. Channel number 1 2 3 4 5 Function Auto Learn Arm/Disarm Channel 2 Output Channel 3/Remote Start Delete all Transmitters 4. Transmit. While holding the Valet®/Program switch, press the desired button to be programmed on the transmitter. Once the button is learned, the siren will chirp, confirming transmitter programming. The Valet®/Program switch can now be released. © 2003 directed electronics, inc. 23 Auto Learn function This function provides a 1­step programming of the transmitter to the following factory default settings: Button Button Button --Lock/Unlock --Channel 2 output --Channel 3/Instant output note: All programmable features will be reset to factory default settings. Delete all Transmitters In case the transmitter(s) is lost or stolen, this function provides removal of all transmitter(s) access from the system memory. Learn Routine will be exited if: The doors are closed. Valet®/Program switch is pressed too many times. More than 15 seconds elapses between programming steps. 24 © 2003 directed electronics, inc. operating settings learn routine Many of the operating settings of this unit are programmable. They can be changed whenever necessary through the Operating Settings Learn RoutineTM. The Valet®/Program push-button switch, plugged into the blue port, is used together with a programmed transmitter to change the settings. To enter the System Features Learn RoutineTM: 1. (The GREEN wire, H1/5, or the VIOLET, H1/7 must be connected. ) 2. (The H1/9 YELLOW switched ignition input must be connected. ) 3. Within 10 seconds, press and release the Valet®/Program switch the number of times for the desired function. Then press the switch once more and hold it. The siren will chirp and the LED will flash to confirm the selected channel. Do not release the Valet®/Program switch. © 2003 directed electronics, inc. 25 4. ® Transmit. While HOLDING the Valet /Program switch, you can select the desired feature settings using the remote transmitter. Pressing Button ® while HOLD - ING down the Valet /Program switch will program the feature to the LED ON settings. The siren will chirp once to indicate the one-chirp setting has been selected. Pressing Button while HOLDING down the Valet®/Program switch will change the setting to the LED OFF setting. The siren will chirp twice indicating that the LED OFF setting has been selected. Release the Valet®/Program switch. to access another feature You can advance from feature to feature by pressing and releasing the Valet®/Program switch the number of times necessary to get from the feature you just programmed to the feature you wish to access. For example, if you just programmed Feature 1 and you want to program Feature 2: 1. [. . . ] Two or more inputs may share the same zone. © 2003 directed electronics, inc. 43 security & convenience expansions Listed below are some of the many expansion options available for use with your system. Some options may require additional parts and/or labor. Please consult with your dealer for a complete list of options available for use with this system. Audio Sensor: Metal on glass, glass cracking, and breaking glass produce distinctive acoustic signatures. [. . . ]