User manual DELL 2300MP

[. . . ] Dell 2300MP Projector Dell™ 2300MP Projector Safety Instructions (Read before connecting the projector) About Your Projector Installation Using Your Projector Troubleshooting Specifications Regulatory Notices Contacting Dell Notes, Notices, and Cautions NOTE: A NOTE indicates important information that helps you make better use of your projector. NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death. Information in this document is subject to change without notice. Reproduction in any manner whatsoever without the written permission of Dell Inc. [. . . ] In order to use the 1:1 aspect ratio, the input must be a computer signal (through VGA cable) less than XGA (1024 x 768), component 576p/ 480i / 480p, S-Video, or Video (composite). If the input signal is a computer signal greater than XGA or component 1080i / 720p, only 16:9 or 4:3 aspect ratio will be available. When an icon is selected, the color of the icon will change to dark blue. 1:1: The input source will be displayed without scaling. 16:9: The input source will be displayed in wide screen mode (16:9). The source will be scaled to fit the width of the screen. 4:3: The input source will be scaled to fit the screen.   Video Mode Select this function to optimize the display image for home use (Movie Mode or Game Mode), conference use (PC Mode) or as user preferable settings (User Mode), or use sRGB mode for more accurate color representation. When an icon is selected, the color of the icon will change to dark blue. Adjusting the settings of White Intensity or Degamma tab, will select User Mode automatically.   White Intensity White Intensity can be adjusted between 0 and 10. file:///C|/Venkat%20Shared/Projectors/2300MP/EN/usage. htm[11/30/2012 2:18:57 PM] Using Your Projector: Dell 2300MP Projector Setting 10 will maximize the brightness. Setting 0 will maximize color reproduction quality. Degamma Degamma can be adjusted between 1 and 4. Adjustment of the setting will change the color performance of the display. Audio Menu Audio   Volume Press Press     Mute to decrease the volume. to increase the volume. file:///C|/Venkat%20Shared/Projectors/2300MP/EN/usage. htm[11/30/2012 2:18:57 PM] Using Your Projector: Dell 2300MP Projector Select the left icon to mute the volume. Select the right icon to un-mute the volume.   Management Menu Management   Menu Location Select the location of the OSD on the screen.   Projection Mode file:///C|/Venkat%20Shared/Projectors/2300MP/EN/usage. htm[11/30/2012 2:18:57 PM] Using Your Projector: Dell 2300MP Projector Front Projection-Desktop The default setting. Rear Projection-Desktop The projector reverses the image so you can project from behind a translucent screen. Front Projection-Ceiling Mount The projector turns the image upside down for ceiling-mounted projection. Rear Projection-Ceiling Mount The projector simultaneously reverses and turns the image upside down. You can project from behind a translucent screen with a ceiling-mounted projection.   Signal Type Manually select signal type RGB, YCbCr, YPbPr.   Lamp Hour Display operating hours since lamp timer reset.   Lamp Reset Use this function only after a new lamp is installed in the projector. [. . . ] This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numerique de la classe B respecte toutes les exigences du Reglement sur le materiel brouilleur du Canada. Canada RSS-210/CNR210 (RF Remote Controller) To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing. [. . . ]