User manual DELL OPTIPLEX NX1 Supplementary Guide

[. . . ] Alle anderen in dieser Dokumentation genannten Warenzeichen und Produktbezeichnungen sind Eigentum der entsprechenden Hersteller und Firmen. Die Dell Computer Corporation verzichtet auf alle Besitzrechte an Warenzeichen und Handelsbezeichnungen, die nicht ihr Eigentum sind. ____________________ La información en este documento podría cambiar sin previo aviso. Marcas comerciales usadas en este texto: Dell, el logotipo DELL y OptiPlex son marcas comerciales registradas de Dell Computer Corporation; Microsoft, Windows y Windows NT son marcas comerciales registradas de Microsoft Corporation; 3Com y EtherDisk son marcas comerciales registradas de 3Com Corporation; Intel, LANDesk and Pentium son marcas comerciales registradas de Intel Corporation. [. . . ] Follow the instructions on your screen, and insert the DX5 Drivers Diskette 2 when prompted. When the setup. exe program is complete, a message appears prompting you to run another program. Click the Start button and then click Run. Type c:\windows\ dx5core. exe and click OK. Follow the instructions on your screen to complete the DirectX drivers installation and restart the system when prompted. 2. 10. After the system restarts, insert the video drivers diskette into the diskette drive. Click the Start button and then click Run. Type a:\setup. exe and click OK. 1-2 Dell OptiPlex GX1 and NX1 Documentation Update 13. Follow the instructions on your screen to reinstall the primary video drivers. When Windows 95 restarts, you can change the display resolution and color depth. See the operating system documentation for more information. NOTE: If you change the display resolution, you may need to adjust the refresh rate for optimum viewing. &RQILJXULQJD&RP3&, &E1, & The following subsections describe how to manually set the network frame type for an Internetwork Packet Exchange/Sequenced Packet Exchange (IPX/SPX)-compatible network protocol and which version of 3Com EtherDisk® XL drivers and utilities you should use. 6HWWLQJWKH1HWZRUN)UDPH7\SH If your system is connected to a network, verify the following network protocol settings: 1. Right-click the Network Neighborhood icon on the Windows desktop, and then select Properties from the pop-up menu. Under the Configuration tab in the Network window, click IPX/SPXCompatible Protocol if it is not already highlighted. Click the Properties button to open the IPX/SPX-Compatible Protocol Properties window. Click the Advanced tab, and then select Frame Type from the Property list. Select the appropriate frame type from the Value menu, according to your network requirements. Follow the instructions on your screen to complete the configuration. 8VLQJ&RP(WKHU'LVN;/9HUVLRQ'LVNHWWHV The 3Com EtherDisk XL version 3. 01 diskettes provided by Dell are compatible with the 3C905 family of NICs. If you purchased a 3Com 3C905-based NIC separately, do not attempt to use the 3Com EtherDisk XL diskettes that came with the NIC. Use only the 3Com EtherDisk XL version 3. 01 diskettes that were provided by Dell. For more information on NIC drivers and utilities, see your system's Reference and Installation Guide or your online Network Administrator's Guide. 0LFURVRIW8SGDWHG$7$3, 'ULYHU If you purchased Microsoft Windows NT 4. 0 with your computer, your system is equipped with the Microsoft-updated ATAPI driver. Dell OptiPlex GX1 and NX1 Documentation Update 1-3 Dell has installed the Microsoft-updated ATAPI driver for your operating system, and it is operative when you receive your computer. [. . . ] To reset the Detected setting, enter the System Setup program during the system's power-on self-test (POST). At the Chassis Intrusion option, press any edit key to reset the setting, and then choose Enabled, Enabled-Silent, or Disabled. NOTE: When the setup password is enabled, the setup password is required to reset the Chassis Intrusion option. '$&6QRRS DAC Snoop lets you correct video problems that may occur when certain video expansion cards are used. If you are using a video expansion card and problems such as incorrect colors or blank windows occur, set DAC Snoop to On. $&3, This option controls the operation of the system's Advanced Configuration and Power Interface (ACPI) feature. When ACPI is set to On, momentarily pressing the power button places the system in a power-saving mode. [. . . ]