User manual DELONGHI AG 70

[. . . ] Warnings · This appliance is designed for home air conditioning and must not be used for other purposes. · It is dangerous to modify or alter the characteristics of the appliance in any way. · The appliance must be installed in conformity with national legislation regulating electrical equipment and installations. · If the appliance requires repair, contact a Service Centre authorised by the manufacturer only. [. . . ] At the same time, the AUTO fan light (N) comes on. In this mode, other speeds cannot be selected. FAN MODE Adjust fan speed by pressing the SPEED button (C) as described for the airconditioning mode. The fan speed selected will be displayed. SETTING THE TIMER The timer can be used to delay appliance start up or shutdown. This avoids wasting electricity by optimising operating periods. How to programme delayed start up · Plug the appliance into a mains socket and press the ON/STAND-BY button (A), then select the required operating mode and other settings (temperature, fan speed, etc). · Press the ON/STAND-BY button (A) again: The appliance switches to stand-by mode (the two central segments are displayed). The last timer setting or the preset value 6. 0 flashes on the display. · Use the + (E) or - (F) buttons to set the number of hours delay before the appliance comes on. During the first ten hours, you can select half hour intervals. For times greater than ten hours, one hour intervals can be selected. If the + (E) or - (F) buttons are pressed for more than 2 seconds, the time runs rapidly up to a maximum of 24 hours. Press the timer button again within a few seconds to confirm the setting. If the setting is not confirmed within a few seconds, the display resets to stand-by. With the timer activated, the countdown before the programmed start up time is displayed and the light (H) flashes. To cancel the timer programme, press the timer button (D) again. How to programme delayed shutdown · Delayed shutdown can be programmed in any operating mode (air conditioning/dehumidifying/fan). The last timer setting or the preset value 6. 0 flashes on the display. · Use the + (E) or - (F) button to set the number of hours delay before the appliance goes off. During the first ten hours, you can select half hour intervals. For times greater than ten hours, one hour intervals can be selected. If the + (E) or - (F) buttons are pressed for more than 2 seconds, the time runs rapidly up to a maximum of 24 hours. Press the timer button again within a few seconds to confirm the setting. [. . . ] · Never use the appliance in very damp rooms (laundries for example). · Never use the appliance outdoors. close doors and windows · Protect the room from direct exposure to the sun by partially closing curtains and/or blinds to make the appliance much more economical to run; · Never rest objects of any kind on the air conditioner; · Never obstruct the air intake 6 or outlet 2; · Make sure there are no heat sources in the room. close blinds or curtains do not cover the appliance · Make sure the air conditioner is standing on a level surface. If necessary, place the two castor locks 14 under the front wheels 3. 28 Cleaning Before cleaning or maintenance, turn the appliance off by pressing the ON/STAND-BY button (A) or in models with remote control unit, by pressing the ON/OFF button, then always unplug the appliance from the mains socket. CLEANING THE CABINET You should clean the appliance with a slightly damp cloth then dry with a dry cloth. [. . . ]