User manual DELONGHI DFH 132X

[. . . ] Do not cover cord with throw rugs, runners, or the like. Arrange cord away from traffic area and where it will not be tripped over. To disconnect the appliance, turn controls to off, then remove plug from outlet. 10. Connect to properly polarized outlets only. [. . . ] However, if you have to use an extension cord, the cord shall be no. 14 AWG minimum size and rated not less than 1875 watts, and has to be used only for supplying power to this appliance. 7 18. Be sure that the plug is fully inserted into an appropriate receptacle. Please remember that receptacles also deteriorate due to aging and continuous use: check periodically if signs overheating or deformations are evidenced by the plug. Do not use the receptacle and CALL your electrician. 19. Check that neither the appliance nor the power cable have been damaged in any way during transportation. 20. CAUTION: to prevent electric shock match wide blade of plug to wide slot, fully insert. 21. Do not cover the appliance while it is functioning in order to avoid overheating with the attendant risk of fire. SAVE THESE INSTRUCTIONS For Household use only CAUTION - Always use the heater in an upright position. - Do not use the heater to dry your laundry. Never obstruct the intake and outlet grilles (danger of overheating). - The appliance must be installed so that the switches and other controls cannot be reached from a person standing in a bathtub or a shower. - The electrical cord must be replaced only by officially authorized personnel. ELECTRIC CONNECTION The fan heater must be connected to a properly polarized A/C 110/120 V household outlet in perfect working condition. Keep loose clothing or bedding, furniture and flammable material away from the outlet where the heater is plugged in. INSTALLATION The fan heater can easily be positioned on any horizontal support surface in an upright position. Models with mode selector and thermostat - Summer use (ventilation only): turn the thermostat dial fully clockwise to the /6 position. - Min power operation: turn the function selector dial to position 1. - Max power operation: turn the function selector dial to position 2. - Switching the appliance off: turn the function selector in position "G" and the thermostat in the then remove the plug from the electrical outlet. Regulating the thermostat When the room has reached the required temperature turn the right thermostat knob in an counterclockwise direction up to the point where the appliance switches off and not 8 beyond. The temperature will be automatically regulated and kept at a constant level by the thermostat. Antifreeze function Turn the left knob to setting 2 then turn the right thermostat knob to setting . [. . . ] Contact your nearest Technical Assistance Service if the fan heater does not start operating normally again. Your product is equipped with a polarized alternating current line plug (a plug having one blade wider than the other). There is only one way it can be plugged into a power supply. If you are unable to insert the plug fully into the outlet, try again by turning it the other way. [. . . ]