User manual DELONGHI DLM 9 XLN

[. . . ] This User Manual contains important safety information and instructions on the operation and maintenance of your appliance. Please take the time to read this User Manual before using your appliance and keep this book for future reference. Meaning Serious injury or death risk Dangerous voltage risk Warning; Risk of fire / flammable materials Injury or property damage risk Operating the system correctly Carefully read all instructions before using your Appliance and keep them in a convenient place for reference when necessary. This manual has been prepared for more than one model therefore your appliance may not have some of the features described within. [. . . ] If you suspect any damage, Make sure that there are no flammable or combustible materials in the close vicinity, such as curtains, oil, cloth etc. The worktop and furniture surrounding the appliance must be made of materials resistant to temperatures above 100°C. The appliance should not be installed directly above a dishwasher, fridge, freezer, washing machine or clothes dryer. 2 Installation of the Oven The appliances are supplied with installation kits and can be installed in a worktop with the appropriate dimensions. The dimensions for hob and oven installation are given below. After making the electrical connections, insert the oven into the cabinet by pushing it forward. Open the oven door and insert 2 screws in the holes located on the oven frame. While the product frame touches the wooden surface of the cabinet, tighten the screws. Appliance's power rating (also indicated on the identification plate). During installation, please ensure that isolated cables are used. An incorrect connection could damage your appliance. If the mains cable is damaged and needs to be replaced this should be done by a qualified personnel. The supply cord should be kept away from hot parts of the appliance and must not be bent or compressed. Otherwise the cord may be damaged, causing a short circuit. 3 Electrical Connection and Safety WARNING: The electrical connection of this appliance should be carried out by an authorised service person or Qualified electrician, according to the instructions in this guide and in compliance with the current local regulations. Before connecting the appliance to the power supply, the voltage rating of the appliance (stamped on the appliance identification plate) must be checked for correspondence to the available mains supply voltage, and the mains electric wiring should be capable of handling the If the appliance is not connected to the mains with a plug, a all-pole disconnector (with at least 3 mm contact spacing) must be used in order to meet the safety regulations. The appliance is designed for a power supply of 220-240V ~ and 380-415V 3N~. If your supply is different, contact the authorised service person or a qualified electrician. The power cable (H05VV-F) must be long enough to be connected to the appliance, even if the appliance stands on the front of its cabinet. Fix the supply cable in the cable clamp and then close the cover. The terminal box connection is placed on the terminal box. Important: Specifications for the product vary and the appearance of your appliance may differ from that shown in the figures below. [. . . ] After releasing it from the clips (a), lift it up. If the oven door is a triple glass oven door, the third glass layer can be removed the same way as the second glass layer. Removal of the Oven Door Before cleaning the oven door glass, you must remove the oven door, as shown below. Open the locking catch (a) (with the aid of a screwdriver) up to the end position. [. . . ]