User manual DELONGHI DO 420

[. . . ] ELECTRIC OVEN FOUR ÉLECTRIQUE HORNO ELÉCTRICO FORNO ELETTRICO DO420 Register this product on-line and receive a free trial issue of Cook's Illustrated. Visit www. delonghi. com for a list of service centers near you. and Canada Only) Enregistrez ce produit en ligne et recevez un numéro gratuit de Cook's Illustrated. Visitez www. delonghi. com pour y voir une liste des centres de réparation proches de chez vous. [. . . ] 4) Initial start-up operation may result in minimal smell and smoke (about 15 min. ). It is due to the protective substance on heating elements which protects them from salt effects during shipping from the factory. 5) When a function is started, the ON indicator light (10) will illuminate. 6 SECTION 2 - USING THE CONTROLS AND SETTING THE MODES 2. 1 - SETTING THE CLOCK · When the appliance is connected to the power supply for the first time, or after a power outage, four dashes will appear on the display (--:--). In order to set the time of day, proceed as described below: 1 Press for 5 seconds the TEMP. /SELECT/CLOCK button (7) (the hours flash on the display). 2 Turn the TIME/TOAST COLOR knob (8) to the desired time (hours). The time set will begin blinking on the display. 3 Press the TEMP. /SELECT/CLOCK button (7) (the minutes flash on the display). 4 Turn the TIME/TOAST COLOR knob (8) to the desired time (minutes). The time set will begin blinking on the display. 5 Press the TEMP. /SELECT/CLOCK button (7) to confirm. It is possible to press the button at any time during cooking to display the current time (the display shows the time set). · If you wish to change the hour on the display once it has been set, press the TEMP. /SELECT/CLOCK button (7) before proceeding to set the new time as described above. · It is possible to display the current time even after starting a function, by pressing the TEMP. /SELECT/CLOCK button (7) (the time is displayed for 2 seconds). 7 2. 2 - BAKE MODE 1 Press the MODE button (6) until the BAKE indicator light (3) is on. The display will show the temperature 350°F. °f 2 If necessary, the desired temperature can be modified by pressing repeatedly the TEMP. /SELECT/CLOCK button (7). The available temperatures are: 200 - 250 - 275 - 300 325 - 350 - 375 - 400 - 425 450°F. The display will show the chosen temperature. 3 Set the cooking time (max 2 hours) by turning the TIME/TOAST COLOR knob(8). °f 4 Press the START/STOP button (9). At the end of the set time the control will emit 3 "beeps" and the display will return to stand-by (showing the time of the day, if previously set). NOTES: · If the cooking time is not set (skipping point 3), the display will show the countdown starting from the default duration of 30 minutes. · The set time can be modified during cooking by simply repeating point 3. The countdown will automatically restart 3 seconds after the last setting. · To display the current temperature (during cooking), simply press the TEMP. /SELECT/CLOCK button (7). · If the START/STOP button (9) is not pressed within 3 minutes from the previous setting, the control will return to stand-by. TIPS FOR GOOD RESULTS: · The oven should not be preheated. [. . . ] For stubborn stains, use a nylon or plastic scouring pad or a non-caustic cleaner. After cleaning, close the crumb tray and check that it is locked securely into position. 1 2 Fig. B 13 LIMITED WARRANTY This warranty applies to all products with De'Longhi or Kenwood brand names. We warrant each appliance to be free from defects in material and workmanship. [. . . ]