User manual DELONGHI DUH 500

[. . . ] Indicador luminoso de seguridad (rojo) C. Indicador luminoso de encendido (naranja) D. Vis 3 EN SAFETY PRECAUTIONS When using electrical appliances, basic precautions should always be followed to reduce risk of fire, electric shock, and injury to persons, including the following: 1. Read all instructions carefully before using the appliance. [. . . ] 23. The first time the appliance is used, run it at the maximum power for at least two hours. During this time, ventilate the room thoroughly to eliminate the "new" smell released by the appliance. It is completely normal for the appliance to emit "creaking" sounds the first time it is run. 24. During use check frequently to determinate if your plug outlet or faceplate is hot. 25. CAUTION: To prevent electric shock, make sure the wide prong of the plug is inserted in the wide slot of the outlet. No user serviceable parts inside. SAVE THESE INSTRUCTIONS FOR HOUSEHOLD USE ONLY Your product is equipped with a polarized alternating current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. CAUTION - Always use the heater in an upright position. - Do not use the heater to dry your laundry. Never obstruct the intake and outlet grilles (danger of overheating). - The appliance must be installed so that the switches and other controls cannot be reached from a person standing in a bathtub or a shower. - The electrical cord must be replaced only by authorized personnel. ELECTRIC POWER CONNECTION The fan heater must be connected to a properly polarized A/C 110/120 V household outlet in perfect working condition. Keep loose clothing or bedding, furniture and flammable material away from the wall outlet where the heater is plugged in. REQUIRED TOOLS FOR ASSEMBLY AND ESTIMATED ASSEMBLY TIME Required Tools(not included): 1 Screwdriver PH 2 x 100 (Phillips type) Estimated assembly time (carry handle and screws): 5 minutes INSTALLATION The fan heater can be easily positioned on any horizontal support surface in an upright position. OPERATION Switching on Plug into the outlet. Switch the appliance on using the switch/switches following the procedures given below: - switch in position «l» = minimum power (indicator light on); - switch in position «ll» = maximum power (indicator light on); To get the maximum power, both switches must be depressed. 5 Adjusting the thermostat: When the room has reached the desired temperature, slowly turn the thermostat knob counter-clockwise until you hear a "click", and not beyond that point. The thermostat will then adjust that set temperature automatically and keep it constant. Anti-freeze function With the thermostat in position and the switches on, the appliance keeps the room at a temperature of approx. [. . . ] If repairs become necessary, see contact information below: U. S. Residents: Please contact our toll free hotline at 1-800-322-3848 or log onto our website at www. delonghi. com. For all accessories, spare parts or replacement parts, please contact our parts division at 1-800-865-6330. Residents of Canada: Please contact our toll free hotline at 1-888-335-6644 or log onto our website at www. delonghi. com. [. . . ]