User manual DELONGHI KR 700P

[. . . ] GB 20-01-2003 15:17 Pagina 9 READ THESE INSTRUCTIONS CAREFULLY BEFORE USING THE APPLIANCE GB IMPORTANT WARNINGS - After removing the packaging, make sure the appliance is complete and undamaged. If in doubt, do not use the appliance and only contact qualified personnel. - The plastic bag in which the appliance is packaged should be kept out of the reach of children, as it is a potential source of danger. - If the plug fitting to the appliance does not match the power outlet, have the outlet replaced with one that is suitable by qualified personnel. [. . . ] The speed can also be varied during operation. Turning off: turn the ON/OFF knob + speed regulator "A5" to the OFF position. Pulse operation press button "A6". The appliance operates until the button is released. GB 20-01-2003 15:17 Pagina 11 USING THE BOWL "B" · Place the appliance on a dry flat surface. DO NOT PLUG THE APPLIANCE INTO THE MAINS UNTIL ALL ACCESSORIES HAVE BEEN CORRECTLY FITTED. · Turn the appliance off before changing accessories. Avoid contact with moving parts while the appliance is plugged in. · Position the bowl "B3" in the motor assembly housing "A3". · Insert one of the following cutters onto the motor shaft "A4" according to your requirements (fig. 2). Universal cutter (to chop meat, vegetables, etc) D1 D3 Mixer accessory for mixing D4 Whisk accessory (for whisking cream, egg white, etc) · Before turning the appliance on, make sure the cutters are positioned correctly. · Put the ingredients to be prepared into the bowl "B3". · Place the cover "B2" on the bowl and rotate anticlockwise until it locks into place (fig. · Start the appliance by turning the ON/OFF + speed regulator knob "A5" to one of the positions available. Important: handle the cutters with extreme care. Always hold the cutters by the handgrip. After processing, the cutters, mixer accessory or whisk must be removed from the bowl "B3" before the ingredients. At the end of processing, always place the guard "D2" on the universal cutter "D1". Open the bowl and/or blender assembly only when the motor is stationary. To push the food to be processed through the hole in the cover, use the feeder provided only. When the appliance is in operation, you are recommended to position the feeders on the feed hole. Never leave the appliance unattended while in operation. The whisk must not be used for mixing. TABLE FOR USING THE BOWL WITH THE UNIVERSAL CUTTER INGREDIENTS Meat Onions Hazelnuts Fish Cheese Liquids (soups) Carrots Bread Apples Parsley Mayonnaise Max. [. . . ] Never operate the appliance at a faster speed. only after the cover "B2" has been removed). · Fit the blender to the motor assembly. Important: handle the cutters with extreme care. · Position the bowl "B3" without accessories, together with cover "B2", in the housing. [. . . ]