User manual DELONGHI PACC 120

[. . . ] IMPORTANT SAFEGUARDS · Use this appliance only as described in this instruction manual. As with any electrical appliance, the instructions aim to cover as many eventualities as possible. Caution and common sense should be used when operating and installing this air conditioner. · This appliance has been manufactured to cool and dehumidify domestic environments and should not be used for other purposes. [. . . ] How to program delayed start up · Plug the appliance into an electrical socket and press the ON/STAND-BY button (A), then select the required operating mode and other settings (temperature, fan speed, etc). · Press the ON/STAND-BY button (A) again: The appliance switches to stand-by mode (the two central segments are displayed). The last timer setting or the preset value 6. 0 flashes on the display. · Use the + (E) or - (F) buttons to set the number of hours delay before the appliance starts. During the first ten hours, you can select half hour intervals. For times greater than ten hours, one hour intervals can be selected. If the + (E) or - (F) buttons are pressed for more than 2 seconds, the time runs rapidly up to a maximum of 24 hours. Press the timer button again within a few seconds to confirm the setting. If the setting is not confirmed within a few seconds, the display resets to stand-by. With the timer activated, the countdown before the programmed start up time is displayed and the timer in operation light (H) flashes. To cancel the timer program, press the timer button (D) again. How to program delayed shutdown · Delayed shutdown can be programmed in any operating mode (air conditioning/dehumidifying/fan). The last timer setting or the preset value 6. 0 flashes on the display. · Use the + (E) or - (F) button to set the number of hours delay before the appliance stops. During the first ten hours, you can select half hour intervals. For times greater than ten hours, one hour intervals can be selected. If the + (E) or - (F) buttons are pressed for more than 2 seconds, the time runs rapidly up to a maximum of 24 hours. Press the timer button again within a few seconds to confirm the setting. When the timer is set, the timer in operation light (H) flashes. At the set time, the air conditioner shuts down and remains in stand-by. To cancel the timer program, press the timer button (D) again. 9 Using the remote control unit MODELS WITH REMOTE CONTROL · Point the remote control at the receiver (R) on the air-conditioner. · The remote control should be handled with extreme care. [. . . ] Precautions Never use petrol, alcohol or solvents to clean the appliance. Never spray insecticide liquids or similar. CLEANING THE AIR FILTERS To keep your air conditioner working efficiently, you should clean the dust filter every week of operation. The filter is housed in the intake grille. [. . . ]