User manual DELONGHI PACL 16A

[. . . ] Warnings · · · · · · · · · · · · · · · · · · · · · · · · · · · This appliance is designed for home air conditioning and must not be used for other purposes. It is dangerous to modify or alter the characteristics of the appliance in any way. The appliance must be installed in conformity with legislation in force in the country concerned. If the appliance requires repair, contact a Service Centre authorised by the manufacturer only. [. . . ] This avoids wasting electricity by optimising operating periods How to programme delayed start up · Plug the appliance into a mains socket and press the ON/STAND-BY button (A), then select the required operating mode and other settings (temperature, fan speed, etc). · Press the ON/STAND-BY button (A) again. The appliance switches to stand-by mode. · Press the TIMER button (H): the last timer setting or the preset value 6. 0 h flashes on the display. · Use the + (G) or - (I) buttons to set the number of hours delay before the appliance comes on. During the first ten hours, you can select half hour intervals. For times greater than ten hours, one hour intervals can be selected. If the "+" (G) or "-" (I) buttons are pressed for more than 2 seconds, the time runs rapidly up to a maximum of 24 hours. Press the timer button again within a few seconds to confirm the setting. If the setting is not confirmed within a few seconds, the display resets to stand-by. With the timer activated, the countdown before the programmed start up time is displayed. To cancel the timer programme, press the timer button (H). How to programme delayed shutdown · Delayed shutdown can be set with the appliance in any operating mode - air conditioning/dehumidifying/fan/heating (certain models only). · Press the Timer button (H) the last timer setting or the preset value 6 . · Use the + (G) or - (I) button to set the number of hours delay before the appliance goes off During the first ten hours, you can select half hour intervals. For times greater than ten hours, one hour intervals can be selected. If the "+" (G) or "-" (I) buttons are pressed for more than 2 seconds, the time runs rapidly up to a maximum of 24 hours. Press the timer button again within a few seconds to confirm the setting. At the set time, the air conditioner shuts down and remains in stand-by. To cancel the timer programme, press the timer button (H). 27 ENGLISH Adjust fan speed by pressing the FAN button (P). The fan speed selected will be displayed (HIGH, MED, LOW). In this mode, AUTO cannot be selected. Self-diagnosis SELF-DIAGNOSIS The appliance has a self diagnosis system to identify a number of malfunctions. IF . . . [. . . ] CLEANING THE CABINET You should clean the appliance with a slightly damp cloth then dry with a dry cloth. For safety reasons, never wash the air conditioning unit with water. Precautions Never use petrol, alcohol or solvents to clean the appliance. Never spray insecticide liquids or similar. [. . . ]