User manual DELONGHI PINGUINO T100 ECO

[. . . ] IT-5751012500 9-03-2004 14:31 Pagina 1 T90/T90ECO/T100ECO Istruzioni per l'uso . . pag. 4 17 30 43 56 69 82 Mode d'emploi et d'entretien . 95 IT-5751012500 9-03-2004 14:31 Pagina 2 Gentile Cliente, aver scelto un prodotto De'Longhi, il leader mondiale nella costruzione dei climaLa ringraziamo per tizzatori portatili. Anni di esperienza in tutto il mondo ci consentono di migliorare costantemente la qualit e le prestazioni di Pinguino e SuperPinguino. [. . . ] Insert it as shown in figure A. B If you have a double window, use the suckers 14 provided to hold the two parts of the window together (fig. C). A Fit the window outlet 12 to the end of the hose 13 . Place the air conditioning unit near a window or French window. Make sure the air exhaust hose is unobstructed. When the button (U) is pressed and the flaps have begun moving alternately forwards and backwards, pressing the button again will lock the flaps in their current position. Pressing the button again will restart the flaps moving forwards and backwards. When the appliance is turned off, they will close irrespective of their position. MODELS WITH REMOTE CONTROL UNIT (model T100ECO only) Operation - Pressing the ON/OFF button ( ) turns the appliance on or off. - Pressing the FAN button selects the required fan speed. Each time the FAN button is pressed, the speed of the fan rotates through the available options (Max, Min, Silent, Auto). On the control panel, the LED corresponding to the selected speed lights up. - The SET buttons (+) and (-) increase or reduce temperature or humidity. The temperature or humidity set is displayed on the control panel. Each time the button is pressed, the appliance confirms the selection with a beep and the light on the remote control unit comes on. NB: The remote control unit can be used for the following functions only: to turn the appliance on or off, vary fan speed and set temperature or humidity depending on the operating mode selected on the control panel. (see pages 22-23) Indicator light Replacing the batteries Remove the cover on the back of the remote control unit; replace the flat batteries with two AAA 1. 5 V batteries, making sure they are in the correct position (see instructions inside the battery compartment); Replace the cover. ON/OFF button FAN button FAN + SET + button SET - button SET - 21 ENGLISH GB-5751012500 14-04-2004 15:59 Pagina 22 Operation TURNING THE APPLIANCE ON Plug into the mains. Two lines appear on the display indicating that the appliance is in standby. Press the ON/OFF button (A) (when turned on, the air conditioning unit starts operating in the same mode as when it was turned off). Press the MODE (B) button until the indicator light corresponding to the required mode lights up: Indicator light C Indicator light D Indicator light E Indicator light F : Air-conditioning mode : BOOST mode (superconditioning) : Dehumidifying mode :FAN MODE (air purifying in model T100 eco only) (in model T100eco, when the selection has been made, the flaps will open at a preset angle. When the air conditioning unit is turned off, the flaps will reclose). AIR-CONDITIONING MODE Ideal for hot humid weather when you need to cool and dehumidify the room. After selecting the air-conditioning mode, the indicator light (M) comes on. To set operation of the appliance correctly, press the "+" (G) or"-" (O) buttons until the required temperature is displayed. [. . . ] For safety reasons, never wash the air conditioning unit with water. Precautions Never use petrol, alcohol or solvents to clean the appliance. Never spray insecticide liquids or similar. CLEANING THE AIR FILTERS To keep your air conditioning unit working efficiently, you should: 1. [. . . ]