User manual DELONGHI PRO 270

[. . . ] GB Read this manual thoroughly before using the appliance. This will ensure optimum results and maximum safety. Save these instructions for future reference. sed by inappropriate, incorrect or irresponsible use or for damage resulting from repairs carried out by unqualified personnel. [. . . ] can be restored by passing the iron a short distance away with the steam jet in operation (vertical ironing programme). · To remove the marks left by furniture and restore carpets to new, allow the steam to penetrate into the flattened pile and brush lightly. · Do not rest or use the iron on zips, hooks, rings etc to avoid scratching the sole plate. · Keep the surface of the sole plate clean. To clean, wipe the cold surface with a damp cloth. The iron must never be treated with descaling products. · After use, always wait for the iron to cool down before putting away. When the iron is hot, take care not to touch the tank. · After ironing, the water remaining in the tank need not be drained. However, the appliance should be drained of water if left unused for long periods. · Separate clothes according to the recommended ironing temperature and begin ironing with items requiring the lowest temperatures. · Silk may be dry-pressed on the reverse. · Wool, cotton and fine linen can either be steamironed on the reverse or on the right side, interposing a thin cloth between the iron and the fabric to avoid "shine". Starched fabrics require greater moisture. Iron whites and light colours on the right side and dark colours on the reverse. Embroidery should also be ironed on the reverse to make it stand out. · Each time the iron is used (including for the first time) or if you have not used steam for several minutes, press the steam delivery button a number of times away from the ironing board. This will eliminate cold water from the steam circuit. · During use, the iron can be rested in a "vertical" position (see figure 1). However, make sure the surface is even to avoid the iron falling over. DESCRIPTION A) B) C) D) E) F) G) H) I) Steam discharge button "Iron at temperature" light Thermostat/steam regulation knob ON/OFF button with ON light Tank door Transparent water tank Iron rest Limescale filter Water hardness indicator paper 9 INSTRUCTIONS The appliance works with normal tap water. Never use other types of water, chemical substances or detergents (e. g. perfumed water, essences, water softener, etc). [. . . ] This is due to a safety system which releases a little steam to avoid overpressure in the plate. It is part of normal operation and not a cause for concern. · To dry iron, do not press the steam button on the iron. LIMESCALE FILTER The iron is fitted with a resin limescale filter in the tank, enabling normal tap water to be used. The resins reduce water hardness and therefore prolong the working life of the iron. [. . . ]