User manual DELONGHI VVX 2100

[. . . ] GB Read this manual thoroughly before using the appliance. This will ensure optimum results and maximum safety. Save these instructions for future reference. mal expansion of the metal it is made from. [. . . ] · Do not rest or use the iron on zips, hooks, rings etc to avoid scratching the sole plate. · Keep the surface of the sole plate clean. To clean, wipe the cold surface with a damp cloth. The iron must never be treated with descaling products. · After use, always wait for the iron to cool down before putting away. When the iron is hot, take care not to touch the tank. · After ironing, the water remaining in the tank need not be drained. However, the appliance should be drained of water if left unused for long periods. · Separate clothes according to the recommended ironing temperature and begin ironing with items requiring the lowest temperatures. · Silk may be dry-pressed on the reverse. · Wool, cotton and fine linen can either be steamironed on the reverse or on the right side, interposing a thin cloth between the iron and the fabric to avoid "shine". Starched fabrics require greater moisture. Iron whites and light colours on the right side and dark colours on the reverse. Embroidery should also be ironed on the reverse to make it stand out. · Each time the iron is used (including for the first time) or if you have not used steam for several minutes, press the steam delivery button a number of times away from the ironing board. This will eliminate cold water from the steam circuit. · During use, the iron can be rested in a "vertical" position (see figure below). However, make sure the surface is even to avoid the iron falling over. · In models with domestic iron, the iron can be secured in position to put it away safely (see fig. ). Important: never move the appliance using the iron as a carrying handle. PREPARATIONS FOR USE The appliance works with normal tap water. Never use other types of water, chemical substances or detergents (e. g. perfumed water, essences, water softener, etc). A water hardness indicator paper is included in the packaging. [. . . ] Top up the water in the tank following the instructions in the section "Filling the tank". 15 NB: Regeneration of the limescale filter extends the efficient working life of the iron. After five years use, the filter should be replaced. Sachets of citric acid and the limescale filter are available from authorised service centres. Reset the regenerate or replace limescale filter light After replacing or regenerating the filter, the next time you use the appliance, you must press the "steam generator on" button for at least eight seconds until the "regenerate or replace filter" light goes out . AFTER IRONING After finishing ironing, you should put the ironing system away with the door tightly closed to avoid dust and foreign bodies falling into the tank and possibly jeopardising operation of the pump. [. . . ]