User manual DELONGHI XVT 9000

[. . . ] ENGLISH Dear customer, Congratulations and thank you for choosing our company. All our products are the result of meticulous design and technical testing. We have produced this manual to enable you to get the best from your appliance and appreciate its quality to the full. If you follow our tips, we are sure the appliance will give you complete satisfaction and long and faithful service. [. . . ] To remove the cover correctly, place the thumbs inside the central cavity in contact with the two protruding edges of the drum. Press on the two protruding edges to ease the cover tab out of the slot. Grip the handle to facilitate extraction of the cover from the front retainer. Press on the bottom of the front retainer. The tab will come out of the slot easily. You can facilitate the operation by acting on the top of the clip. Lift the cover and empty the drum. Remove the air/water conveyor (3) and pour the water into the drum until it covers the two projections on the bottom of the tank (about 800 cc). Replace the conveyor, insert the drum cover and press down as far as it will go until it hooks into place, then holding the catch (10) down, replace the drum. NB: To use the appliance as a wet vacuum cleaner, you do not need to fill the drum with water. 23 24 Fit the hose (25) onto the appliance. Insert the bayonet coupling (24) into the socket on the cover (1), press down and rotate clockwise as far as it will go. Open the safety hatch (13) and insert the plug (23) into the socket (12) on the bottom of the appliance, making sure the arrow points upwards. Push down until it locks into place. 23 To remove, press the locking fins at the side and pull. A Insert the extension tube (26) onto the hose handgrip, making sure the handgrip coupling is perfectly connected to the extension tube coupling by pushing firmly together. Lock in place by rotating the locking ring (A). To make sure it is fitted correctly, attempt to remove the extension tube. To insert the second extension tube or brush, proceed as described above. Plug into the mains socket and press the ON/OFF button (14). Power to the appliance is now on. 24 To turn the vacuum function on, press the suction ON/OFF button (21) on the hose handgrip. The appliance will be at maximum suction power. To turn suction off, press the suction ON/OFF button (20) again. To reduce or increase the suction force of the motor, hold button (20) down until the required power is reached. NB: Do not press button (15) to turn power to the steam generator on when the appliance is being used as a vacuum cleaner only. Important: while vacuuming up liquids, when the drum (2) is full of water, a device shuts off suction and motor revolutions increase. You must turn the appliance off by pressing the ON/OFF button (14). Unplug from the mains socket and empty the drum. This device may also trip when the filters (7) and (4) are exhausted. [. . . ] To dry, slope the tool in such a way that the squeegee adheres perfectly to the surface to be dried. Recommendation: in low temperatures, you are recommended to warm the windows first with a weak jet of steam to avoid the risk of breakage due to sudden temperature changes. 31 Nozzle with steam insert and brush (44) Insert the extension tube either directly onto the handgrip, making sure the coupling is perfectly connected to the handgrip coupling or to the extension tube, pushing firmly together and then locking by rotating the locking ring. Combined with steam, the brush facilitates removal of the dirt from joints between tiles, radiators, bathroom fittings and all difficult to reach points. Coupling for steam tools (45) Enables a greater range of specific steam cleaning tools to be fitted directly to the hose handgrip or extension tube. Crevice tool (46) and brushes (round 48 and "in-line" 47) After fitting the crevice tool, attach one of the brushes provided. The brushes are different colours, so you can reserve each one for a specific purpose (eg. [. . . ]