User manual DELTA DORE TYPHONE 2 SV GUIDE D INSTALLATION

[. . . ] (subject to a use in accordance to its purpose and/or fittings in accordance to the standards in force) (and complies with the following standards) : Your device is guaranteed for 3 years from its date of purchase. To benefit from this extension, a proof of purchase bearing the date of purchase must accompany the thermostat when you return it. This guarantee covers replacement of faulty parts, labour, and return post to the customer. [. . . ] For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product. ) via your telephone line Connections according to use Telephone line-in lightning arrester integrated in device case - standard 48V telephone input - current throughput : 10kAmps with 8/20 pulse, residual voltage < 900V · In order to mount the device on the wall, it must be separated from its base. to do this , unscrew the lockingscrew , open the case and disconnect the flat (connection) strap as indicated. After separation from the case, the base must be fixed to the wall using screws and plugs or on a flush-mounting box (centre-to-centre distance 60 mm) using the holes . Breakable partitions can be removed to allow the connection cable to pass, if necessary ( : flush-mounting box, : wall mounting) Easy to use voice synthesis technology · Please note: Full wiring circuits are not shown in the diagram for reasons of clarity. Safety devices and other mandatory accessories are not shown. - The device must be fitted in compliance with UTE C15-100 and state-ofthe-art specifications. - Appliances connected to or in the vicinity of the device must comply with EC directive 89/336 on electrical interference. To choose another version, it is necessary to separate the product from its base (see § 3) and turn it over to see the jumpers as shown on the picture. Remove the jumper(s) according to your choice. Flush-mounting box : use the hole in the bottom of the case to connect the wires. Wall-mounting : breakable partition can be removed to allow the connection cables to pass. The connection to the telephone line can be made by the "RJ11 plug / telephone plug" cable. the RJ11 plug has to be connected on the side on the product. IMPORTANT : when reassembling do not forget to connect the flat (connection) strap between the front case and its base. Please note that terminal 1 of the integrated lightning arrester (see technical specification) has to be earthed at the installation, and terminal 2 has to be connected with the yellow/green earth-wire coming from the front case of the appliance (see picture). [. . . ] Press keys 1 or 2 briefly to turn control 1 or 2 on or off (LED on or off). If TYPHONE 2 SV has connected before you can answer a call, press and take the incoming call. Pin-in your 4-digit code Control n°1 is turned off (example) Control n°1 is turned on Press to modify [. . . ]