User manual DENON AVC-A1HD

[. . . ] GraphicalUserInterface Use this manual in combination with the operating guide displayed on the GUI screen. GUI Menu Operation (vpage 23) GUI Menu Map (vpage 24) Language (vpage 41) Remote Control Unit Operations (vpage 67) AV SURROUND AMPLIFIER AVC-A1HD Owner's Manual n SAFETY PRECAUTIONS RISK OF ELECTRIC SHOCK DO NOT OPEN · DECLARATION DE CONFORMITE Par la présente, D&M Holdings Inc. , Denon Brand Company déclare que l'appareil AVC-A1HD est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE, e conforme alle seguenti normative: EN60065, EN55013, EN55020, EN55022, EN55024, EN61000-3-2, EN61000-3-3, EN300328, EN301489-01, EN301489-17 e EN50385. La déclaration de conformité pourra être consultée auprès de notre représentant en Europe, DENON Europe. CAUTION: CAUTION To completely disconnect this product from the mains, disconnect the plug from the wall socket outlet. The mains plug is used to completely interrupt the power supply to the unit and must be within easy access by the user. CAUTION: VORSICHT: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. [. . . ] z3: This can be selected when playing DTS sources. z4: This can be selected when playing DTS sources including a discrete 6. 1-channel signal identification signal. [Selectable items] Subwoofer The tone cannot be adjusted when in the DIRECT, PURE DIRECT and HOME THX CINEMA mode. Adjust each subwoofer channel tone. [Selectable items] [Variable range] Bass ­6dB ~ +6dB Bass Adjust bass for all channels together. [Variable range] ­6dB ~ +6dB When using the surround back speaker, you can change the "SB CH Out" setting by pressing the STANDARD button. This can be set individually for the separate surround mode other than PURE DIRECT, DIRECT and Home THX Cinema mode. Treble Adjust treble for all channels together. SB CH Out (for 2-channel sources) Determine whether to use surround back speakers. [Variable range] ­6dB ~ +6dB [Selectable items] ON OFF "Bass" and "Treble" can be set when "Tone Defeat" is set to "OFF" . 50 d Room EQ Select room equalizer for current environment. f Dynamic EQ Make Dynamic EQ settings. About the RESTORER function · Such compressed audio formats as MP3, WMA (Windows Media Audio) and MPEG-4 AAC reduce the amount of data by eliminating signal components that are hard for the human ear to hear. The RESTORER function generates the signals eliminated upon compression, restoring the sound to conditions near those of the original sound before compression. It also corrects the sense of volume of the bass to obtain richer sound with compressed audio signals. · This is displayed on the GUI menu and can be set when the input source is set to "NET/USB" or when analog signals or PCM signals , (fs = 44. 1/48 kHz) are input. Getting Started [Selectable items] Audyssey : Optimize frequency response of all speakers. [Selectable items] ON OFF Connections Audyssey Byp. L/R : Optimize frequency response of speakers except front L and R speakers. Operating from the main unit Press the DYNAMIC EQ button. Audyssey Flat Manual OFF : Optimize frequency response of all speakers to flat response. : Apply frequency response set with "Manual EQ" (vpage 33). : Turn equalizer off. Setup · "Dynamic EQ" is displayed when selecting "Audyssey" "Audyssey , Flat" or "Audyssey Byp. L/R" in the "Room EQ" setup. When set to "ON" the " , " indicator is lit. · When the audio setup measuring results have changed, " lights. " Playback h Night Mode Optimized setting for late-night listening. Operating from the main unit or main remote control unit Press the ROOM EQ button on the main unit or the EQ button on the main remote control. OFF OFF Audyssey Audyssey Manual Manual When "Audyssey" is selected, " Audyssey Byp. L/R Audyssey Flat Audyssey Flat " lights. Remote Control g RESTORER This function restores compressed audio signals to how they were before compression and corrects the sense of volume of the bass and treble to obtain richer playback sound. [Selectable items] OFF Low Middle High Operating from the main unit or main remote control unit Press the NIGHT button on the main unit or the NGT button on the main remote control unit. The " " indicator lights when "Low" "Middle" or "High" is , selected. OFF Low High Middle Multi-Zone [Selectable items] OFF Mode1 (RESTORER 64) Mode2 (RESTORER 96) Mode3 (RESTORER HQ) The default setting for "NET/USB" and "iPod" is "Mode3" All others . are set to "OFF" . When "Audyssey Byp. L/R" or "Audyssey Flat" is selected, or when the auto setup measuring results have changed, " " lights. Information · "Audyssey" "Audyssey Byp. L/R" and "Audyssey Flat" can be , selected after the auto setup procedure has been performed. · If the settings of the speakers for which "None" has been determined at "Auto Setup" are changed, "Audyssey" "Audyssey Byp. L/R" and , "Audyssey Flat" cannot be selected and measurements have to be taken again to include the newly-added speakers. · When using headphones, "Room EQ" is always set to "OFF" . Troubleshooting Operating from the main unit or main remote control unit During playback, press the RESTORER button on the main unit or the RSTR button on the main remote control unit. [. . . ] b1 : I codici preimpostati possono essere registrati nel modo TV. b1 : Es posible guardar estos códigos preajustados en el modo TV. b1 : Deze voorkeuzecodes kunnen worden opgenomen in de TV-modus. b1 : Dessa förinställningskoder kan lagras i TV-läget. [. . . ]