User manual DENON AVP-A1HD

[. . . ] GraphicalUserInterface Use this manual in combination with the operating guide displayed on the GUI screen. GUI Menu Operation (vpage 23) GUI Menu Map (vpage 24) Language (vpage 42) Remote Control Unit Operations (vpage 66) AV SURROUND PRE-AMPLIFIER AVP-A1HD Owner's Manual n SAFETY PRECAUTIONS RISK OF ELECTRIC SHOCK DO NOT OPEN · DECLARATION DE CONFORMITE Par la présente, D&M Holdings Inc. , Denon Brand Company déclare que l'appareil AVP-A1HD est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE, e conforme alle seguenti normative: EN60065, EN55013, EN55020, EN55022, EN55024, EN61000-3-2, EN61000-3-3, EN300328, EN301489-01, EN301489-17 e EN50385. La déclaration de conformité pourra être consultée auprès de notre représentant en Europe, DENON Europe. CAUTION: CAUTION To completely disconnect this product from the mains, disconnect the plug from the wall socket outlet. The mains plug is used to completely interrupt the power supply to the unit and must be within easy access by the user. CAUTION: VORSICHT: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. [. . . ] OFF Mode 1 (RESTORER 64) Mode 3 (RESTORER HQ) Mode 2 (RESTORER 96) Getting Started Connections f Dynamic EQ d Room EQ Select room equalizer for current environment. Make Dynamic EQ settings. Setup About the RESTORER function OFF · Such compressed audio formats as MP3, WMA (Windows Media Audio) and MPEG-4 AAC reduce the amount of data by eliminating signal components that are hard for the human ear to hear. The RESTORER function generates the signals eliminated upon compression, restoring the sound to conditions near those of the original sound before compression. It also corrects the sense of volume of the bass to obtain richer sound with compressed audio signals. · This is displayed on the GUI menu and can be set when the input source is set to "NET/USB" or when analog signals or PCM signals , (fs = 44. 1/48 kHz) are input. Playback [Selectable items] ON [Selectable items] Audyssey : Optimize frequency response of all speakers. except front L and R speakers. Operating from the main unit Press the DYNAMIC EQ button. Remote Control Audyssey Byp. L/R : Optimize frequency response of speakers Audyssey Flat Manual OFF : Optimize frequency response of all speakers to flat response. : Apply frequency response set with "Manual EQ" (vpage 33). · "Dynamic EQ" is displayed when selecting "Audyssey" "Audyssey , Flat" or "Audyssey Byp. L/R" in the "Room EQ" setup. When set to "ON" the " , " indicator is lit. · When the audio setup measuring results have changed, " lights. " Multi-Zone h Night Mode Optimized setting for late-night listening. Information Operating from the main unit or main remote control unit Press the ROOM EQ button on the main unit or the EQ button on the main remote control. OFF OFF Audyssey Audyssey Manual Manual When "Audyssey" is selected, " Audyssey Byp. L/R Audyssey Flat Audyssey Flat " lights. g RESTORER This function restores compressed audio signals to how they were before compression and corrects the sense of volume of the bass and treble to obtain richer playback sound. [Selectable items] OFF Low Middle High Troubleshooting [Selectable items] OFF Mode1 (RESTORER 64) Mode2 (RESTORER 96) Mode3 (RESTORER HQ) The default setting for "NET/USB" and "iPod" is "Mode3" All others . are set to "OFF" . Operating from the main unit or main remote control unit Press the NIGHT button on the main unit or the NGT button on the main remote control unit. The " " indicator lights when "Low" "Middle" or "High" is , selected. OFF Low High Middle When "Audyssey Byp. L/R" or "Audyssey Flat" is selected, or when the auto setup measuring results have changed, " " lights. j Audio Delay Compensate for mismatched timing between video and audio. This sets the delay time for audio signals. s Brightness Adjust picture brightness. Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting [Variable range] 0 ~ +12 Information Status Shows information about current settings. [Variable range] 0 ms ~ 200 ms d Chroma Level Operating from the main unit or the main remote control unit b The GUI menu is not displayed when carrying out this setting. q Press the AUDIO DELAY button on the main unit or A. DL button on the main remote control unit. Adjust picture chroma level (saturation). [Variable range] ­6 ~ 0 ~ +6 F Menu tree F Information f Hue Adjust color hue. Status a MAIN ZONE s ZONE2/3/4 · This cannot be adjusted when playing in the EXT. [. . . ] b1 : I codici preimpostati possono essere registrati nel modo TV. b1 : Es posible guardar estos códigos preajustados en el modo TV. b1 : Deze voorkeuzecodes kunnen worden opgenomen in de TV-modus. b1 : Dessa förinställningskoder kan lagras i TV-läget. [. . . ]